Description
When a tom hangs up at the edge of shooting light, a plain brass bead just doesn't cut it. The Truglo Gobble-Dot Xtreme fixes that with two bright fiber optic rods: a bigger .060" red pipe up front and a smaller .035" green pipe in the rear. Line the green dots up on either side of the glowing red front and you've got a fast, high-contrast aiming picture that guides your eye to the bead instead of making you hunt for it. It's the kind of upgrade that turns a shotgun you already trust into one you can shoot with confidence in low light.
Snapping the Gobble-Dot Xtreme Onto Your Rib
This is about as easy as an upgrade gets. Both the front and rear sights clip right over the rib and hold with a friction fit, so there are no screws to drive, no holes to tap, and no adhesive to fuss with. The whole job takes a couple of minutes at the kitchen table, and since it's fully reversible you can pull it back off any time. This particular model is cut for a 1/4" rib and drops onto most Remington shotguns like the 870, 1100, and 11-87, along with camo Browning Gold and Charles Daly guns. Just check your rib width before ordering, since Truglo builds this same sight in other widths to match different receivers.
Built for Turkey Loads and Then Some
The Gobble-Dot Xtreme carries the endorsement of the National Wild Turkey Federation, and it earns that badge in the turkey woods where fast, precise aim matters most. The low-profile black frame keeps it snag-free and sitting tight through the punch of heavy 3" and 3-1/2" magnum loads. It's a non-magnetic snap-on design, so it stays put on recoil without relying on magnets or tape.
Don't box it in as a turkey-only rig, though. That same bright sight picture works great on a slug gun for deer, and plenty of folks run it for general field work when they want quicker target acquisition than a bare bead allows.
Key Specifications
- Manufacturer: TRUGLO
- Manufacturer Part Number: TG941XA
- UPC: 788130012758
- Product Type: Front/Rear Sight Set
- Sight Type: Fiber Optic
- Front Fiber Color: Red
- Rear Fiber Color: Green
- Front Fiber Diameter: .060"
- Rear Fiber Diameter: .035"
- Rib Width: 1/4" (Ventilated or Solid)
- Attachment: Snap-On, Non-Magnetic
- Frame Finish: Black
- Fits: Most Remington, Browning Gold (camo), Charles Daly
- Endorsement: National Wild Turkey Federation
- Length: 6.9"
What’s Included
- Front fiber optic sight (red)
- Rear fiber optic sight (green)
Frequently Asked Questions
How does the Gobble-Dot Xtreme attach to my shotgun?
Both sights snap directly over the rib and hold with a friction fit, so no screws, tools, or adhesive are needed. It's a non-magnetic design, which means it stays put through recoil without relying on magnets or tape. Installation takes just a couple of minutes and is fully reversible if you ever want to remove it.
Will this 1/4" set fit my shotgun?
This model is built for a 1/4" ventilated or solid rib and fits most Remington shotguns like the 870, 1100, and 11-87, plus camo Browning Gold and Charles Daly guns. Truglo makes the same sight in other rib widths for different receivers, so measure your rib before ordering. If you're running a wider rib such as 3/8", you'll want the matching version instead.
Is the Gobble-Dot Xtreme just for turkey hunting?
It's endorsed by the National Wild Turkey Federation and shines in the turkey woods, but it's not limited to gobblers. The same bright red-front, green-rear sight picture works great on a slug gun for deer and for general field shooting. Anywhere you want faster target acquisition than a plain bead allows, this set earns its keep.
How big are the fiber optic dots?
The front fiber measures .060" and the rear fibers are .035", giving you a larger, brighter red dot up front and smaller green dots to frame it in back. That size difference is intentional, since it helps your eye align the rear dots on either side of the front for a quick, natural sight picture. The whole setup stays low profile so it won't snag or add bulk.





Reviews
There are no reviews yet.