Description
There are prettier lever guns on the wall, but few are as ready to get dirty as the Taylors & Company 1886 Journey. This one takes the classic 1886 action, a John Browning design with well over a century of history behind it, and rebuilds it for the deer stand and the bear woods. The barrel and receiver wear black Cerakote to shrug off rain and sweat, the stock and forend are camo synthetic instead of walnut, and the 19 inch barrel keeps the whole package quick to swing in thick timber. At 7.71 pounds with a 37.44 inch overall length, it carries well and soaks up a fair bit of the .45-70's push.
Why the 1886 Journey Earns a Spot in the Truck
The .45-70 Government has been dropping big game since the 1870s, and the Journey's 1:18 twist rate is cut for the heavier modern loads a lot of hunters favor now. You get 5+1 on tap through the tube magazine, a large loop lever that runs smooth with gloves on, and a tang safety right where your thumb lands. The muzzle is threaded 5/8×24, so adding a brake or other muzzle device is a five minute job instead of a gunsmith visit.
Sighting Options on the Taylors 1886 Journey
Out of the box you get a fiber optic front sight paired with a peep rear, a fast combination in low light when the big ones tend to move. The rear sight sits on an integrated Picatinny rail, so if you would rather run a red dot or a scout style optic, the mounting real estate is already there. The adjustable cheekrest on the stock lets you dial your cheek weld up for glass or down for the irons, which is a small touch that makes a real difference once you settle in behind it. Sling swivels come fitted from the factory, because a .45-70 lever gun like this is meant to be carried a long way from the road.
Key Specifications
- Manufacturer: Taylors and Company
- Manufacturer Part Number: 210317
- UPC: 810012512831
- Caliber: .45-70 Government
- Action: Lever Action
- Capacity: 5+1
- Barrel Length: 19", threaded 5/8×24
- Twist Rate: 1:18" RH
- Overall Length: 37.44"
- Weight: 7.71 lbs
- Barrel/Receiver Finish: Black Cerakote
- Stock: Camo synthetic with adjustable cheekrest
- Sights: Fiber optic front, peep rear with integrated Picatinny rail
- Safety: Tang
- Hand: Right
What’s Included
- Taylors & Company 1886 Journey rifle with factory-installed sling swivels
- Owner's manual
Frequently Asked Questions
Can I mount a scope or red dot on the 1886 Journey?
Yes. The rear peep sight sits on an integrated Picatinny rail section, so you can mount a red dot or a scout style optic without drilling anything. The adjustable cheekrest also lets you raise your comb height to get a proper cheek weld behind glass.
What is the thread pitch on the 1886 Journey's muzzle?
The 19 inch barrel is threaded 5/8×24, which is the common pattern for most .30 caliber and larger muzzle devices. That makes it easy to add a brake or other muzzle accessory. A brake is a popular addition on .45-70 lever guns since the cartridge has some real recoil with heavy loads.
Is the 1886 Journey good with modern high-pressure .45-70 loads?
It was built with that in mind. The 1:18 twist rate is spec'd to stabilize today's heavier bullets, and the 1886 action is a strong design that modern metallurgy makes even stronger. As always, check your specific ammo maker's guidance, but this rifle was designed around current production .45-70 offerings.
How does the 1886 Journey handle in the field?
Very well for a big bore lever gun. The 19 inch barrel keeps overall length at 37.44 inches, so it points fast in brush and rides easily in a truck or on an ATV. At 7.71 pounds it has enough heft to tame recoil without wearing you out on a long hike, and the large loop lever cycles smoothly even with gloves on.




Reviews
There are no reviews yet.