$499.00
19 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Rost Martin came out of nowhere at SHOT Show 2024 and turned heads fast. The RM1C is their first pistol, and it's the kind of debut that makes established brands nervous. It's a striker-fired 9mm compact built in Dallas, Texas, and it brings a level of standard features that most manufacturers either charge extra for or leave off entirely. The hammer-forged 4-inch match barrel with a target crown, the funneled magazine well, the oversize undercut trigger guard, the extended beavertail, and the textured "gas pedal" index points on both sides of the frame are all there from the factory. So are fully ambidextrous slide stops and magazine releases. The fit and finish back it all up.
Rost Martin's signature Responsive Grip Texturing (RGT) is one of those things you have to put your hands on to appreciate. It's a graduated laser stippling that essentially grips back harder the more pressure you apply, so it feels comfortable during a casual range session but locks in when you're running the gun hard. Modular backstraps let you dial in the fit for your hand size, and the low bore axis keeps muzzle flip in check for faster follow-up shots. Slide-top anti-glare serrations are a subtle but smart touch that cut down on eye fatigue and speed up sight picture acquisition.
The slide comes pre-cut and ships with a metal RMR-pattern optic plate, which opens the door to a wide range of popular red dots including Trijicon RMR, SRO, and RCR, plus Holosun 407C, 507C, 508T, and 509T. Additional plates for other footprints are available separately directly from Rost Martin. One thing worth knowing: the factory iron sights aren't tall enough to co-witness through most optics, so if that matters to you, plan for suppressor-height backup sights down the line. The full three-slot Picatinny rail up front handles any popular pistol light without issue.
The steel sights that come on the gun are actually dovetailed into the slide, not plastic, and they follow the same pattern as Springfield XD sights, making swaps straightforward. The trigger breaks cleanly with a short reset, and field stripping is refreshingly simple since you don't have to pull the trigger to get the slide off the frame. Holster support is solid, with fits available from ANR Design, Blackpoint Tactical, CrossBreed, DeSantis, and others. After 1,500 rounds of testing by independent reviewers, reliability held up without issue. The lifetime warranty from Rost Martin covers the long haul.
The RM1C ships with a metal RMR-pattern plate, which fits the Trijicon RMR, SRO, and RCR, as well as Holosun's 407C, 507C, 508T, and 509T. Rost Martin also offers additional plates for other footprints, including Docter, Leupold DeltaPoint Pro, and Shield patterns, sold separately. Keep in mind that the stock iron sights are not tall enough to co-witness with most optics, so you may want to budget for suppressor-height irons if you plan to run both.
Yes on both counts. The full three-slot Picatinny rail up front accommodates virtually any popular pistol-mounted light. For holsters, support came at launch from well-known makers including ANR Design, Blackpoint Tactical, CrossBreed, and DeSantis, and the RM1C fits closely enough to a Glock 19 footprint that many G19-cut holsters work as well.
The RM1C uses a flat-face trigger with a safety blade, a crisp break, and an extra-short reset. Rost Martin rates the pull at approximately five pounds, though real-world testing has measured it slightly heavier fresh out of the box, which is common for factory striker-fired pistols and typically smooths out with round count. The reset is audible and tactile, which most range-goers appreciate.
Field stripping is very straightforward and notably does not require pulling the trigger to release the striker, which is a welcome safety advantage over some competitors. You retract the slide slightly, pull down the takedown latch on both sides, and the slide lifts free from the frame. The guide rod is steel, and the whole process is tool-free.
This RM1C variant (RM1CBLKOSP10CA) is configured with a 10+1 round capacity using a proprietary magazine block, and it includes a magazine disconnect safety. Aside from those differences, the core platform is the same, featuring the same hammer-forged barrel, Responsive Grip Texturing, optic-ready slide, ambidextrous controls, and lifetime warranty as the standard model.
Rost Martin is a veteran-owned company headquartered in Dallas, Texas, founded by former Marine officer Chris Toomer and his wife Stefany. The RM1C is American-made, with domestic production confirmed by the absence of import markings and the presence of domestic part numbers on the slide and barrel. The design draws from a proven lineage with some collaboration from AREX, but the final product is built and supported in the US.
| UPC | 860011577362 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | RM1CBLKOSP10CA |
| Action | |
| Barrel Length | 4" |
| Caliber/Gauge | 9mm |
| Capacity | 10 + 1 |
| Shipping Weight | 3.0 |
| Slide Description | Serrated w/Optic |
You must be logged in to post a review.
Reviews
There are no reviews yet.