$36.75
6 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The VICTRA-12 is built to be taken apart, and that modularity is the whole point. Yankee Hill Machine designed it so you can run the full 12 inch stack for maximum suppression or pull baffles to shorten it up when balance and handling matter more. The catch is that each length needs its own set of assembly rods to hold the baffle stack together, and this kit is the one that gets you to the 8 inch configuration. You get a matched pair of rods, ready to drop in whenever you want to reconfigure.
The 8 inch configuration hits a nice middle ground. You shed a meaningful amount of length and weight off the front of your shotgun compared to the full 12 inch setup, which makes a real difference on a gun you are carrying through the field or swinging on moving targets. You still keep enough baffle stack to take the sting out of most loads, and plenty of owners find the shorter setups plenty comfortable for hunting and range work. If your VICTRA-12 spends more time on a defensive shotgun or a shorter barreled pump, this is the length a lot of folks settle into.
These rods are machined from 17-4 stainless steel, the same tough, corrosion resistant material YHM uses throughout the VICTRA-12 system. That matters on a shotgun suppressor, where plastic wad residue and fouling mean you will be taking the can apart for cleaning more often than a rifle suppressor. The rods hold up to repeated disassembly and reassembly without complaint, and the black finish matches the rest of the unit.
Reconfiguring the VICTRA-12 is a bench-at-home job. Pull the rods, remove the baffles you do not need, install this 8 inch pair, and snug everything back down. If you think you will want to bounce between multiple lengths, YHM also offers a combo kit with 6, 8, and 10 inch rods, but if 8 inches is your sweet spot, this single kit covers it.
The VICTRA-12 suppressor uses a pair of assembly rods to hold its baffle stack together, and each length configuration requires rods sized for it. This kit provides the two rods needed to run the suppressor in its shortened 8 inch configuration. Your VICTRA-12 ships with 12 inch rods, so shorter setups require a kit like this one.
No special tools beyond what came with your suppressor. The VICTRA-12 includes a multi-use wrench, and reconfiguring is a simple matter of removing the original rods, pulling the baffles you do not need, and installing this pair. It is designed to be a user-serviceable system you can handle at home.
You give up some sound reduction any time you remove baffles, since fewer baffles means less volume to slow down gases. The full 12 inch configuration averages around 135 dB at the ear with most commercial loads, and shorter setups run a bit louder. The 8 inch length is a popular compromise that keeps solid suppression while cutting noticeable length and weight.
Yes. They are machined from 17-4 stainless steel, which is strong and highly corrosion resistant. Shotgun suppressors need regular teardown for cleaning because of wad and powder fouling, and these rods are built to handle that routine without wearing out.
| UPC | 841812102830 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | YHM-1208 |
| Color | Black |
| Length | 11.2500 |
| Model | |
| Package Height | 1.0 |
| Package Width | 5.0 |
| Product Type | Accessory-Silencer Accessories |
| Shipping Weight | 0.2 |
You must be logged in to post a review.
Reviews
There are no reviews yet.