Description
If you run an HK416, MR556, or M27 IAR and you're tired of fighting the factory rail every time you need to touch your gas block or barrel, the Strike Industries GRIDLOK-416 Lightspeed changes the whole routine. It bolts onto the HK OEM barrel nut with no proprietary hardware, then relies on the patent-pending Quick Rail Detach GRIDLOK latch so you can pull the handguard off and put it back on in seconds. That means adjustable gas block work and suppressor installs or removals stop being a wrestling match.
What Sets the GRIDLOK-416 Lightspeed Apart
The Lightspeed configuration keeps things lean with front and rear 1913 Picatinny sections rather than a full-length top rail, and it carries a built-in flip-up front backup iron sight so you've got aiming reference ready to go. M-LOK slots sit at the 3, 6, and 9 o'clock positions for lights, lasers, bipods, and grips, and four integrated 360-degree free-swivel QD sockets live at the rear at 2, 4, 8, and 10 o'clock for flexible sling setups. A rear rail tab indexes into the HK upper receiver to keep the top rail centered and aligned.
Built for Real Duty Use
Machined from 6061-T6 aluminum in a one-piece free-float design, this rail keeps weight down while staying stiff and strong. The muzzle-end cut is shaped to clear suppressors up to 1.57 inches (39.9mm) in diameter and works with SI muzzle devices including the OPPRESSOR line for that tucked look. Because the whole thing drops on and off so fast, a lot of folks keep more than one length on hand to reconfigure from a short CQB build to a longer bipod-ready marksman setup without swapping rifles.
Fitment for the GRIDLOK-416 Lightspeed
This rail is built for the HK416, HK416 A5, HK416 A7, MR556, and M27 IAR platforms that do not use ambidextrous sling attachment points. Older HK416 and MR556 uppers with those ambi sling points are not compatible, so check your receiver before ordering. One quick note on setup: the two locking screws at the base are meant to be adjusted while the base is off the barrel nut, not while it's mounted.
Key Specifications
- Manufacturer: Strike Industries
- Manufacturer Part Number: GRIDLOK416L16
- UPC: 793811764703
- Length: 16 inches
- Configuration: Lightspeed (front and rear 1913 Picatinny)
- Material: 6061-T6 aluminum
- Design: One-piece free-float
- Accessory Mounting: M-LOK at 3, 6, and 9 o'clock
- QD Sockets: Four 360-degree free-swivel at 2, 4, 8, and 10 o'clock
- Front Sight: Built-in flip-up backup iron sight (BUIS)
- Suppressor Clearance: Up to 1.57 in (39.9mm) diameter
- Mounting: Factory HK OEM barrel nut
- Detach System: Quick Rail Detach GRIDLOK latch (patent pending)
- Color: Black
- Compatibility: HK416, HK416 A5, HK416 A7, MR556, M27 IAR (without ambi sling attachment points)
What’s Included
- GRIDLOK-416 Lightspeed 16" M-LOK handguard with integrated Quick Rail Detach latch and built-in flip-up front sight
Frequently Asked Questions
Will the GRIDLOK-416 Lightspeed fit my HK416?
It's designed for the HK416, HK416 A5, HK416 A7, MR556, and M27 IAR platforms that do not use ambidextrous sling attachment points. Older HK416 and MR556 uppers built with ambi sling points are not compatible. Check your receiver's sling attachment setup before ordering to be sure.
Do I need special tools or a new barrel nut to install this handguard?
No. The GRIDLOK-416 mounts directly on your factory HK OEM barrel nut, so there's no proprietary nut to swap. One tip: the two base locking screws are meant to be adjusted while the base is off the barrel nut rather than while it's installed.
How fast can I actually remove the rail?
That's the whole point of the GRIDLOK design. A simple push and pull of the quick-detach latch gets the handguard off in seconds, which makes adjusting a gas block or installing and removing a suppressor much easier than pulling a traditional rail.
What's the difference between the Lightspeed and Full Duty versions?
The Lightspeed runs front and rear 1913 Picatinny sections to keep things lighter, while the Full Duty has a full-length top Picatinny rail. Both share the same M-LOK slots, QD sockets, built-in flip-up front sight, and quick-detach mounting.




Reviews
There are no reviews yet.