Description
The Savage Rascal is a fantastic little single-shot .22 for teaching new shooters, but the factory sights only take you so far. This EGW 1-Piece Drilled Picatinny Base solves that by giving you a solid, full-length rail to mount a scope or red dot, which makes a world of difference for young or first-time shooters trying to find their target. It's a 0 MOA flat profile, which is exactly what you want for the short-range rimfire work the Rascal is built for.
What Makes This EGW Rascal Base Worth Bolting On
This rail is machined from domestic 6061 T6 extruded aluminum and finished with a matte black Type II anodizing, so it holds up to real use without adding much weight at right around 2 ounces. The drilled version comes ready to line up with the factory mounting holes on the Rascal receiver, so there's no fuss figuring out hole placement. Picatinny cross slots run the full length of the rail, giving you plenty of room to slide your rings forward or back and dial in proper eye relief with just about any optic.
Fitment and Optic Options for Your Savage Rascal
At 5.094 inches long with a 1.884 inch center spread and a 0.4 inch height from the top of the receiver, this base accepts both Picatinny and Weaver style rings, so you're not locked into one brand. It's ambidextrous too, milled on both sides for bolt clearance whether the rifle is set up for a righty or lefty. The milled center channel keeps the weight down and in many cases leaves the factory iron sights usable. A popular pairing is a compact rimfire scope or a small red dot like a Bushnell TRS, which is a combo a lot of folks have set up for their kids with great results.
Quick Notes on Installing the Rascal Picatinny Base
EGW includes #6-48 x 1/4 inch screws and a T-10 bit in the package, so you've got what you need to get going. A smart install calls for roughly 20 inch-pounds of torque and a drop of blue thread locker on the screws to keep everything locked in after the recoil of a session at the range.
Key Specifications
- Manufacturer: EGW
- Manufacturer Part Number: 41960
- UPC: 841370105793
- Fits: Savage Rascal
- Action Type: Bolt Action
- Elevation: 0 MOA
- Rail Type: One-Piece Picatinny
- Ring Compatibility: Picatinny or Weaver
- Material: 6061 T6 Aluminum
- Finish: Matte Black Type II Anodized
- Overall Length: 5.094 in
- Center Spread: 1.884 in
- Height (receiver to rail): 0.4 in
- Weight: Approx. 2 oz
- Ambidextrous: Yes
- Mounting: Drilled for factory receiver holes
What’s Included
- One-piece Picatinny base
- #6-48 x 1/4 inch mounting screws
- T-10 bit
Frequently Asked Questions
Will this EGW base fit my Savage Rascal?
Yes, this rail was designed specifically for the Savage Rascal single-shot .22. The drilled version lines up with the factory mounting holes on the receiver, so installation is straightforward. It's also ambidextrous, machined on both sides for bolt clearance regardless of how the rifle is configured.
What rings work with the Savage Rascal Picatinny base?
The base accepts both Picatinny and Weaver style scope rings, so you've got flexibility in picking an optic setup. Full-length cross slots let you position your rings to get proper eye relief. A compact rimfire scope or a small red dot is a common choice for the Rascal.
What does 0 MOA mean on this base?
A 0 MOA base sits flat with no built-in forward cant, which is ideal for the short-range shooting the Rascal is made for. EGW recommends a 0 MOA setup for distances inside roughly 150 yards. Since the Rascal is a close-range rimfire trainer, this flat profile is the right call.
Does the Savage Rascal base come with mounting hardware?
Yes, EGW includes #6-48 x 1/4 inch screws and a T-10 bit so you have what you need to mount it. A good install uses around 20 inch-pounds of torque with a drop of blue thread locker on the screws to keep things secure after repeated shooting.





Reviews
There are no reviews yet.