$653.00
18 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
There is a real case for running a dedicated 5.56 can instead of stretching a multi-caliber suppressor across your whole safe, and the Rugged Razor 556 makes that case well. Because the bore is sized for 5.56 NATO and .223 Rem specifically, you get better sound performance and noticeably less gas blowback than most do-it-all cans, which matters a lot on direct impingement ARs where excess gas ends up in your eyes and your action. At 6.4 inches long, 1.5 inches in diameter, and just 13.4 ounces, it keeps a carbine feeling like a carbine instead of a boat anchor.
The Razor 556 wears a high-temp FDE Cerakote finish over a 17-4 PH stainless steel tube and mount, with a Cobalt 6 baffle core inside. That combination is why Rugged rates this can for full-auto and belt-fed use with no barrel length restrictions. Run it on a short-barreled AR, mag dump it on a hot range day, whatever your shooting looks like, this suppressor is built to take it. Rugged backs it with their unconditional lifetime warranty, which tells you how much confidence they have in the construction.
Mounting runs through Rugged's Dual Taper Locking System. The front taper gives you a concentric lockup and keeps carbon off the threads, while the rear taper acts as a friction lock so the can stays put shot after shot. The payoff is a repeatable return to zero when you pull the suppressor off and put it back on, plus a built-in gauge check so you know it is seated correctly before you send the first round.
Unlike some quick-detach cans that make you buy the mount separately, the Razor 556 ships with a 1/2×28 M2 muzzle brake and a 5.56 front cap in the box. Thread the brake onto your barrel, lock the can on, and you are suppressed. For AR owners who want one purpose-built can that does the 5.56 job right, this one is tough to beat.
It ships ready to go. A 1/2×28 M2 muzzle brake is included in the box, so you can install the brake on a standard-threaded 5.56 barrel and lock the suppressor right on. Extra M2 brakes are available from Rugged if you want to set up multiple rifles for one can.
Yes. The Razor 556 has no barrel length restrictions and is rated for full-auto and belt-fed fire, so a short-barreled 5.56 gun is well within its comfort zone. It was also designed with reduced gas blowback in mind, which makes a big difference on shorter gas systems that tend to push more gas back at you.
That is one of the strong points of Rugged's Dual Taper Locking System. The front taper creates a concentric lockup while the rear taper friction-locks the can in place, giving you a repeatable point of impact when reattaching. The mount also keeps carbon off the threads, so it will not seize up after long range sessions.
No, and it does not need to be. Rifle suppressors like this one are largely self-cleaning since the high pressure of 5.56 blows most carbon out during firing. The Cobalt 6 baffles are fully welded for heat and abrasion resistance, and Rugged covers the whole can with an unconditional lifetime warranty.
| UPC | 850044499281 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | RZRFDE556 |
| ATF Type | Silencer |
| Caliber/Gauge | .223 REM/5.56 NATO |
| Color | Flat Dark Earth |
| Length | 2 |
| Model | |
| Package Height | 8.0 |
| Package Width | 2.0 |
| Product Type | Suppressor |
| Shipping Weight | 1.2 |
| Thread Pattern | 1/2"-28 tpi |
You must be logged in to post a review.
Reviews
There are no reviews yet.