Description
If you're running a Redding bushing-style neck sizing die, this .249 titanium nitride bushing lets you control exactly how much your case necks get worked. Instead of a one-size die squeezing the neck down and then an expander ball pulling it back out, a bushing sizes the neck to a precise diameter in a single pass. That means less brass getting beat up, more consistent neck tension, and cleaner bullet release at the shot.
The bushing itself is made from heat-treated steel, hand-polished to a surface hardness in the Rc 60 to 62 range, then given a titanium nitride surface treatment. That TiN coating bumps up the effective surface hardness even more and cuts down on friction during the sizing stroke, so the case neck slides through with noticeably less drag. The payoff over time is a bushing that holds its dimension and a sizing operation that feels smoother on the press handle.
How the .249 Redding Bushing Fits Your Setup
This bushing carries the standard Redding external dimensions of 1/2 inch outside diameter by 3/8 inch long, and it drops right into any Redding bushing-style neck sizing die. It also plays nice with most other popular bushing dies on the market, so you're not locked into one brand's system. The inside diameter is clearly marked so you can grab the right one off the bench without guessing.
Choosing the Right Bushing Diameter
Sizing bushings come in .001 inch increments across the full lineup, which runs .185 through .368 and covers calibers from .17 all the way up to .338. To figure out which diameter you need, measure the outside neck diameter of a loaded round with a good micrometer, then subtract .001 to .002 inches to account for brass spring-back and the tension you want on the bullet. Many reloaders keep a few neighboring sizes on hand to fine-tune tension for different brass and bullet combinations. Made in the USA.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 76249
- UPC: 611760762499
- Diameter: .249 in
- Surface Treatment: Titanium Nitride (TiN)
- Material: Heat-treated steel
- Surface Hardness: Rc 60 to 62
- External Dimensions: 1/2 in O.D. x 3/8 in long
- Bushing Type: Neck sizing die bushing
- Compatibility: Redding bushing-style neck sizing dies
- Country of Origin: United States
- Shipping Weight: 0.0188 lbs
What’s Included
- One Redding .249 in Titanium Nitride Neck Sizing Bushing (76249)
Frequently Asked Questions
What dies does the Redding .249 neck sizing bushing fit?
It freely interchanges in all Redding bushing-style neck sizing dies thanks to its standard 1/2 inch O.D. by 3/8 inch long dimensions. It also works in most other popular bushing-die brands on the market. Keep in mind the die and shellholder are sold separately from the bushing.
How do I know if .249 is the right bushing size for my loads?
Measure the outside neck diameter of a loaded cartridge with a precision micrometer, then subtract about .001 to .002 inches. That subtraction accounts for brass spring-back and gives you the neck tension that holds the bullet without over-working the case. If your measurement lands on .250 or .251 loaded, a .249 bushing is a common starting point.
What's the advantage of the titanium nitride finish over a plain steel bushing?
The TiN surface treatment adds to the already hardened steel body, increasing the effective surface hardness and reducing friction during the sizing stroke. In practice that means the neck slides through with less drag and the bushing holds its dimension over a long service life. Both styles size the same way, the TiN version just runs smoother.
Does a bushing die eliminate the need for an expander ball?
Yes, that's the whole idea behind bushing-style sizing. The bushing sizes the neck to a precise diameter in one pass, so you don't need an expander ball dragging back through the neck and potentially pulling it off center. The result is more consistent neck tension and less stress on your brass.





Reviews
There are no reviews yet.