Description
Anyone who loads the 7mm Rem Mag knows how fast magnum brass likes to stretch, and trimming after every firing gets old quick. The RCBS X Die Full Length Set tackles that head-on. The X-Sizer die full-length resizes the case while a specially designed mandrel contacts the case mouth and holds growth in check, so after one initial trim you can run that lot of brass for a long stretch before trimming comes back into the picture.
How the 7mm Rem Mag X-Die Works
The magic here is the mandrel. Trim every case in the lot to about .020 inch under maximum length first, then set the die up per the instructions. From there, the mandrel acts as a stop at the case mouth and reduces the normal growth rate instead of letting brass pile up in the neck. Cases will grow a few thousandths over the first several firings, then stabilize below maximum length with no noticeable loss of accuracy or case life. RCBS found their brass could go roughly 20 firings before needing another trim, and plenty of reloaders report the primer pocket wears out before the case ever needs cutting again.
What Comes in the X Die Full Length Set
This is a two-die set built for the person who wants to standardize their 7mm Rem Mag process. You get the X-Die full-length sizer with its mandrel, expander ball, and decapping pin all built in, plus a standard RCBS seater die for setting bullet depth. Because the case self-centers on the mandrel, you tend to see low runout without having to neck turn.
Why 7mm Rem Mag Reloaders Reach For It
For a high-volume hunting and long-range cartridge like the 7 Mag, cutting out repeated trimming is a real time saver. RCBS has been building loading gear for decades, and the X-Die is one of their smartest answers to brass that won't stay put. If you've got a trimmer you'd rather not babysit every session, this set earns its spot on the bench. Keep in mind you'll want the correct RCBS shellholder, which is sold separately.
Key Specifications
- Manufacturer: RCBS
- Caliber: 7mm Remington Magnum
- Die Type: Full Length Sizing and Bullet Seating
- Quantity of Dies: 2
- Sizer Feature: X-Die mandrel with expander ball and decapping pin
- Initial Trim: .020 inch under maximum case length
- Material: Steel
- Country of Origin: United States
- Manufacturer Part Number: 37612
- Model: 37612
- UPC: 076683376121
- Shipping Weight: 1.3 lbs
What’s Included
- X-Die Full Length Sizer Die
- Standard Seater Die
- Instruction sheet
Frequently Asked Questions
Does the RCBS X Die for 7mm Rem Mag really let me stop trimming?
It greatly reduces trimming rather than magically eliminating it forever. You trim the whole lot once to about .020 inch under maximum length, then the mandrel limits how fast the brass grows so it stabilizes below maximum. RCBS found cases could go roughly 20 firings before needing another trim, and many reloaders find the case wears out before it needs cutting again.
What dies come in this 7mm Rem Mag X Die set?
You get two dies: the X-Die full-length sizer and a standard RCBS seater die. The sizer has the mandrel, expander ball, and decapping pin built into it, so it handles sizing and depriming in one pass. The seater die sets your bullet depth.
Do I need a shellholder with this RCBS X Die set?
Yes, and the shellholder is sold separately. You'll want the correct RCBS shellholder sized for the 7mm Rem Mag case head. Check RCBS shellholder charts to match the right number if you don't already have one on the bench.
Can I use the X-Die sizer without the trim-once feature?
You can. The X-Sizer works as a standard full-length resizing die with or without taking advantage of the mandrel's case-growth control. That said, you get the most out of it by doing the initial .020 inch trim and setting it up as RCBS directs.




Reviews
There are no reviews yet.