0
0

Redding Neck Sizing Die 270 Win – Series A Reloading Die (81135)

UPC: 611760811357

$43.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you're reloading .270 Win brass for a single bolt gun and want to squeeze more firings out of every case, Redding's Neck Sizing Die does exactly that. Instead of working the entire case like a full-length die, it resizes just the neck and leaves the body and shoulder fire-formed to your chamber. That means less brass stress, fewer cases tossed in the scrap bin, and a cartridge that drops right back into the rifle it came out of.

This is a conventional single die with standard 7/8"-14 threads, so it screws into any common reloading press without fuss. Inside you'll find a decapping rod assembly with a neck expander button, which knocks out the spent primer and sets your inside neck diameter in the same motion. Build quality is classic Redding, machined from case-hardened steel and held to the tight tolerances the Cortland, New York outfit is known for.

Why Handloaders Reach for the Redding .270 Neck Sizing Die

Neck sizing earns its keep with precision-minded reloaders. By leaving the body untouched, you keep the case matched to your chamber, which a lot of folks find delivers more consistent bullet alignment and tighter groups when the ammo is used in that same rifle every time. The payoff on brass life is real too, since you're not repeatedly expanding and squeezing the whole case back to factory spec.

Getting the Most From This Redding Neck Sizing Die

The one thing to keep in mind is that neck-sized brass stays fire-formed to one chamber, so it shouldn't be swapped between different .270 rifles. Most reloaders who go this route still keep a full-length die on the bench to bump the shoulder back every handful of firings. Pair this die with a seating die and you've got a simple, effective setup for accurate .270 Winchester loads. A shell holder isn't included, so grab the correct one for the .270 case head if you don't already have it.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 81135
  • UPC: 611760811357
  • Cartridge: .270 Winchester
  • Die Style: Neck Sizing Die
  • Die Series: Series A
  • Material: Case-Hardened Steel
  • Thread: 7/8"-14 (standard press fit)
  • Number of Dies: 1 (individual die)
  • Decapping: Includes decapping rod assembly with neck expander button
  • Best Use: Bolt-action, single-rifle reloading

What’s Included

  • Redding .270 Winchester neck sizing die
  • Decapping rod assembly with neck expander (size button)

Frequently Asked Questions

What does the Redding Neck Sizing Die for .270 Win actually size?

It resizes only the neck of your bottleneck .270 cases, leaving the body and shoulder fire-formed to your chamber. The built-in decapping rod also removes the spent primer and sets your inside neck diameter in the same stroke. The result is less brass working and a case that fits your rifle snugly.

Can I use neck-sized .270 brass in more than one rifle?

No. Because this die leaves the case body fire-formed to the chamber it was last fired in, that brass should stay with the single rifle it came from. If you plan to shoot the same cases across multiple .270 rifles, a full-length sizing die is the better choice.

Does the Redding 81135 neck sizing die come with a shell holder?

No, a shell holder is not included and is sold separately. You'll want the correct shell holder for the .270 Winchester case head, which shares the same head size as several other common cartridges. If you already reload the .270 or similar cases, there's a good chance you have the right one on hand.

Will this die fit my reloading press?

Yes. It's a conventional die with standard 7/8"-14 threads, so it threads into virtually any common single-stage, turret, or progressive press. Setup is straightforward and follows Redding's included instructions.

Additional information

UPC

611760811357

Manufacturer

Manufacturer Part Number

81135

Reviews

There are no reviews yet.

Be the first to review “Redding Neck Sizing Die 270 Win – Series A Reloading Die (81135)”