Description
The Magpul Hunter 700 Stock takes one of the most popular bolt guns ever made and drops it into a stiffer, more comfortable, more capable platform. It's built for right-hand Remington 700 short actions, and the whole thing installs in the time it takes to torque two action screws. No bedding, no inletting, no trip to the gunsmith. Pull your barreled action out of the factory stock, set it into the Hunter, tighten to spec, and you're done. Folks who've installed one consistently mention it's about a fifteen-minute job with basic hand tools.
The heart of this stock is a Type III hard anodized, machine-finished A380 cast aluminum V-bedding block wrapped in a reinforced polymer shell. That combination is what gives the Hunter its reputation for shooting well above its price bracket. The barrel free floats and clears aftermarket profiles up to 0.920 inches in diameter measured 5.5 inches forward of the breech, so most factory and heavier custom barrels fit without touching wood or plastic anywhere along the channel. Range reports back it up, with plenty of owners printing groups nearly identical to what they got out of far pricier benchrest and custom stocks.
Dialing In the Hunter 700 to Fit You
Adjustability is where this stock earns its keep. Length of pull moves from roughly 13 to 15 inches using spacers, and the comb height adjusts to get your cheek weld locked in behind glass of any height. The stock ships pre-fitted with a 0.25-inch riser, and optional 0.50 and 0.75-inch risers are available if you're running tall rings or a big objective. The 60-degree grip angle and non-slip rubber butt pad round out an ergonomic package that feels planted whether you're prone off a bipod or braced on a knee.
Room to Grow With the Magpul Hunter Stock
Out of the box the Hunter works with standard Remington 700 hinged floorplates. When you're ready for detachable mags, Magpul's optional Bolt Action Magazine Well converts it to AICS-spec magazines in 5.56×45 or 7.62×51 pattern with no custom fitting. It also accepts most factory and aftermarket triggers, and the forend carries M-LOK slots for bipods, rails, and sling hardware. Made in the USA.
Key Specifications
- Manufacturer: Magpul Industries
- Manufacturer Part Number: MAG495GRY
- UPC: 840815100744
- Model: Hunter 700
- Color: Stealth Gray
- Fits: Remington 700 Short Action, right-hand receivers only
- Construction: Reinforced polymer shell with A380 cast aluminum V-bedding block
- Bedding Block Finish: Type III hard anodized, machine finished
- Length of Pull: Adjustable ~13 to 15 inches
- Comb Height: Adjustable, ships with 0.25 inch riser
- Barrel Clearance: Free floats profiles up to 0.920 inch dia. 5.5 inch forward of breech
- Accessory Mounting: M-LOK slots
- Magazine Compatibility: Factory hinged floorplate; AICS-spec with optional Bolt Action Mag Well
- Weight: Approx. 3 lbs without action and bottom metal
- Country of Origin: Made in USA
What’s Included
- Magpul Hunter 700 Stock (Gray)
- Length of pull spacers (two installed)
- 0.25 inch cheek riser (pre-fitted)
- Installation instructions
Frequently Asked Questions
Will the Magpul Hunter 700 fit my Remington 700 short action?
It's built for standard Remington 700 pattern short actions with factory hinged floorplates, and it fits right-hand receivers only. It accepts all factory Remington barrels plus aftermarket profiles up to 0.920 inches in diameter measured 5.5 inches forward of the breech. Blind floorplate ADL models will need current factory Remington hinged bottom metal or the optional Magpul Bolt Action Magazine Well.
Is the Hunter 700 really a drop-in install?
Yes. There's no bedding or inletting required. You pull the barreled action from your old stock, set it into the Hunter's aluminum V-block, and torque the action screws to spec. Most owners have it done in about fifteen minutes with basic hand tools. Keep in mind factory action screw length can vary, so occasionally a screw may need swapping to get everything seated just right.
Can I run detachable magazines with this stock?
Out of the box it works with your factory internal hinged floorplate. If you want detachable box mags, add Magpul's optional Bolt Action Magazine Well and the stock will accept AICS-spec magazines in 5.56×45 or 7.62×51 pattern with no custom inletting needed.
Does the Magpul Hunter 700 come with cheek risers for a higher comb?
It ships pre-fitted with a 0.25-inch riser, which works well for a lot of standard scope setups. If you're running taller rings or a large objective, Magpul offers optional 0.50 and 0.75-inch risers to fine-tune your cheek weld. The length of pull adjusts from roughly 13 to 15 inches using the included spacers.





Reviews
There are no reviews yet.