Description
The Lee Precision .360 Buckhammer Factory Crimp Die is the finishing touch a lot of handloaders want on their straight-wall deer loads. It uses a collet to squeeze the case mouth into the bullet and apply a rifle-type crimp that locks everything in place. The big win here is that your bullets don't need an existing crimp groove. The collet is strong enough to form one as it works, which opens the door to a much wider range of projectiles when you're building .360 Buckhammer ammo.
Why the Collet Crimp Matters for .360 Buckhammer
The .360 Buckhammer is a rimmed, straight-wall cartridge that Remington built off a blown-out .30-30 case, loaded with fat .358-diameter bullets in the 180 to 200 grain range. It runs best in lever actions and single shots, and a firm crimp is important with these guns since the cartridges ride under magazine spring tension and recoil. A solid crimp keeps bullets from walking under that pressure and gives you consistent neck tension round after round.
What the Lee .360 Buckhammer Crimp Die Does on the Bench
Beyond holding the bullet put, a good crimp helps accuracy. Pressure has to build to a higher level before the bullet starts moving, and that higher, more uniform start pressure tends to flatten out velocity spread. The collet design also makes it hard to buckle a case the way a traditional roll crimp sometimes can, so it's forgiving if your case lengths aren't perfectly uniform.
This is a standalone crimp die that threads into any standard 7/8-14 press, so you can drop it into an existing .360 Buckhammer setup as a separate step or add it to a turret. Worth noting up front: this die is steel, not carbide, so a light wipe of lube on the collet area keeps it running smooth over long sessions.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 92035
- UPC: 734307920357
- Cartridge: .360 Buckhammer
- Die Type: Factory Crimp Die (Collet Style)
- Crimp Style: Rifle-type collet crimp
- Material: Steel (not carbide)
- Thread: 7/8-14 standard
- Crimp Groove Required: No, collet forms one
- Shipping Weight: 0.31 lbs
What’s Included
- Lee .360 Buckhammer Factory Crimp Die
- Plastic storage container
Frequently Asked Questions
Do my bullets need a crimp groove to use the .360 Buckhammer Factory Crimp Die?
No. The collet in this die is strong enough to form a crimp groove as it works, so you can crimp bullets that don't already have one. That flexibility is one of the main reasons handloaders reach for the Lee Factory Crimp Die when building .360 Buckhammer loads.
Is the Lee .360 Buckhammer Factory Crimp Die carbide?
No, this die is made of steel rather than carbide. It works great for the job, just keep the collet area lightly lubed to keep things smooth during longer reloading sessions.
Do I still need a separate seating die if I have this crimp die?
Yes. This is a dedicated crimp die only, so you'll still need a sizing die and a seating die to load complete .360 Buckhammer rounds. Many reloaders run this as a separate final step because crimping and seating in one motion isn't always ideal for consistency.
Will this die fit my press?
It uses standard 7/8-14 threads, so it'll thread into just about any common single-stage, turret, or progressive press. You can add it to an existing .360 Buckhammer die set without any trouble.





Reviews
There are no reviews yet.