Description
The Jebs Head Hunter Turkey Ported Choke Tube is one of those upgrades that quietly changes the way your turkey gun performs. Cut to a .655 constriction and built specifically for the Browning A5 Invector-DS system, it takes a standard turkey load and turns it into a tight, dense pattern that holds together out where longbeards like to hang up. Jebs earned its stripes on the still-target circuit, taking home NWTF World Still Target Championship wins, and that competition pedigree shows up in how this choke throws pellets.
What Sets the Head Hunter Choke Apart
The heart of this tube is Jebs' patented multi-staged interior bore. Instead of one straight taper, the bore works the shot column in stages so the wad separates cleanly from the payload. That clean break is what gives you those precise, heavily concentrated patterns on the target rather than fliers scattered off to the edges. Pair it with quality turkey ammo and you will see the difference on paper before you ever see it in the woods.
Ported Design and Solid Build
The ports machined into the front of the tube help bleed off gas and take some of the sting out of stout turkey loads, which is a welcome thing when you are patterning a box of heavy magnums off a bench. It is produced from stainless steel with a matte finish that keeps glare down when a gobbler is working in close and reading every glint. Made in the USA and built to hold up season after season.
Getting the Most From Your .655 Head Hunter
A .655 constriction sits right in the sweet spot most turkey hunters reach for, tight enough to stretch your effective range without pinching patterns into an unforgiving knot. Spend an afternoon at the range testing a few shot sizes and brands, mark your best pattern, and you will head into the season knowing exactly where your gun hits. Just confirm your barrel uses the Browning A5 Invector-DS thread pattern before dropping it in.
Key Specifications
- Manufacturer: Jebs Choke Tubes
- Model: Head Hunter Turkey
- Manufacturer Part Number: JPC-12I1/655
- UPC: 643906923662
- Gauge: 12 Gauge
- Constriction Diameter: .655
- Choke Type: Turkey
- Configuration: Browning A5 Invector-DS
- Porting: Ported
- Material: Stainless Steel
- Finish: Matte
- Country of Origin: Made in USA
- Shipping Weight: 0.22 lb
What’s Included
- 1 Jebs Head Hunter Turkey Ported Choke Tube
Frequently Asked Questions
What guns does this Head Hunter choke fit?
This tube is machined for the Browning A5 Invector-DS choke system in 12 gauge. It will not interchange with older Invector or Invector Plus threading, so check that your A5 barrel uses the Invector-DS pattern before ordering. If you run a different platform, Jebs makes the Head Hunter in other thread patterns too.
What shot sizes work best with the .655 constriction?
The .655 pairs well with most turkey loads, and it really shines with dense payloads like TSS in the 7 through 9 range as well as high-quality lead turkey loads. The best move is to pattern a couple of different shells to see which one your barrel likes most. Every gun and choke combo has its favorite, so a little bench time pays off.
Does the porting really cut down on recoil?
The ports let gas vent before the muzzle, which helps tame some of the kick and muzzle jump from stout turkey magnums. You will notice it most when patterning a full box off a bench. It is not going to make a heavy load feel like a target shell, but it takes the edge off.
Is the Jebs Head Hunter good for long-range turkey hunting?
That is exactly what it was built for. The multi-staged bore keeps patterns dense and consistent well past where standard chokes start to fall apart, which is why it has a following among competitive still-target shooters and hunters chasing hung-up gobblers. Confirm your effective range at the pattern board and hunt with confidence.





Reviews
There are no reviews yet.