Description
Anyone running a progressive press knows the real time sink in reloading pistol ammo is the changeover between calibers and powder charges. The Hornady 050129 Pistol Micrometer Metering Insert takes the guesswork out of that process by giving you a reference point you can actually come back to. Instead of guessing and re-measuring every time you switch loads, you dial the micrometer back to a known setting and get in the ballpark fast, then fine tune from there.
The insert carries etched marks that let you meter charges anywhere between 0.5 and 17 grains, which covers the vast majority of handgun loads from light target rounds to heavier magnum charges. It replaces the standard pistol metering insert in your powder measure and swaps in and out with a single push of the button, no tools and no fuss.
What the Hornady Pistol Micrometer Insert Brings to Your Bench
The big advantage here is repeatability. The micrometer adjustment gives you a positive reference for every change you make, so when you find a load your gun likes, you can note the setting and return to it later with confidence. Folks who load multiple calibers on a progressive setup tend to call this one of the better upgrades they have made, since changing powder charges becomes a quick dial job instead of a start-from-scratch routine. Keep in mind the setting gets you close, and a final check on your scale is always smart before running a batch.
Built to Last and Easy to Fit
This micrometer insert is machined from steel for a lifetime of use and measures about 3.65 inches long. It is designed for the Hornady Lock-N-Load Powder Measure and requires the pistol rotor and standard pistol metering insert, which are sold separately. If you already have the pistol rotor assembly set up, this drops right in and upgrades the way you dial your charges. The finish is silver and the whole thing is straightforward to install right at your loading station.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 050129
- UPC: 090255501292
- Series: Metering Insert
- Type: Pistol Micrometer Metering Insert
- Charge Range: 0.5 to 17 grains
- Material: Steel
- Finish: Silver
- Length: Approx. 3.65 in
- Compatibility: Hornady Lock-N-Load Powder Measure with pistol rotor
- Shipping Weight: 0.3 lbs
What’s Included
- Hornady Pistol Micrometer Metering Insert (050129)
Frequently Asked Questions
What do I need to use the Hornady 050129 pistol micrometer insert?
You need a Hornady Lock-N-Load Powder Measure along with the pistol rotor and standard pistol metering insert, which are sold separately. This micrometer insert replaces the standard pistol insert and pushes into place with the button on the rotor. Without the pistol rotor setup it will not meter correctly.
What charge range does the pistol micrometer metering insert cover?
The etched marks let you meter charges between 0.5 and 17 grains, which handles the great majority of handgun loads. That range covers everything from light target rounds up through heavier magnum pistol charges. It is purpose built for the smaller pistol chamber rather than rifle-sized charges.
Does the micrometer setting mean I can skip weighing my charges?
Think of the micrometer as a reference tool rather than a replacement for your scale. It gets you back to a known setting quickly when you change powders or calibers, but small fine adjustments are still part of the process. Always verify your charge weight on a scale before running a full batch.
Is this the same as a complete pistol rotor assembly?
No, the 050129 is just the micrometer metering insert itself. It is an upgrade to the metering insert portion of your existing pistol rotor setup. If you do not already own the pistol rotor and standard metering insert, you will want to add those as well.





Reviews
There are no reviews yet.