Description
Case mouth prep is one of those steps every reloader learns to respect, and the Hornady Deluxe 4-Blade Chamfer/Deburr Tool handles both halves of the job in a single tool. One end chamfers the inside edge of the case mouth so a bullet starts straight and seats without shaving copper or lead, while the other end knocks down the burr left on the outside after trimming. The four-blade cutting head is sharpened rather than just scraping the brass, so it bites cleanly and stays square to the case mouth instead of jumping off and chattering.
Why the 4-Blade Chamfer/Deburr Tool Earns Bench Space
The extra cutters are the real story here. Where a simple two-flute tool can skip and gouge, the four-blade design keeps contact even all the way around, which means smoother cuts and more consistent results from one case to the next. That squareness matters when you are chasing accuracy, since an off-center or ragged mouth is one of the quiet culprits behind runout and inconsistent neck tension.
Built for Years on the Reloading Bench
Hornady machines this one from hardened steel, so the cutting edges hold up through thousands of cases. The knurled center section gives you a comfortable, positive grip so your fingers aren't fighting the tool during a long brass prep session. It is compact enough to toss in a kit and simple enough that there's really nothing to adjust. Insert it into the case mouth, give it a few turns, and you're done.
Handles Your Whole Caliber Lineup
This is a universal hand tool that works across common case sizes from .17 all the way up to .45 caliber, so it covers everything from varmint rounds to big-bore pistol and rifle brass. Whether you're starting with fresh brass or cleaning up cases right after trimming, it takes the sharp edges off so your next loading step goes smoothly.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 050117
- UPC: 090255501179
- Product Type: Chamfer/Deburring Tool
- Blade Count: 4-Blade
- Function: Inside Chamfer / Outside Deburr
- Design: Double-Ended Hand Tool
- Material: Hardened Steel
- Finish: Silver / Graphite
- Grip: Knurled Center Section
- Caliber Range: .17 to .45 Caliber
- Quantity: 1
- Weight: 0.15 lb
What’s Included
- Hornady Deluxe 4-Blade Chamfer/Deburr Tool (1)
Frequently Asked Questions
What does the Hornady Deluxe 4-Blade Chamfer/Deburr Tool do?
It preps the case mouth after trimming or on new brass by chamfering the inside edge and deburring the outside edge. The inside chamfer helps a bullet start straight and seat without shaving material, while the outside deburr removes the sharp ring left by trimming. It handles both jobs with one double-ended tool.
What calibers will this chamfer/deburr tool work on?
It is a universal design that works across common case sizes, roughly from .17 up to .45 caliber. That covers most rifle and pistol brass you'd run across a reloading bench. You just insert it into the case mouth and give it a few turns.
What makes the 4-blade version better than a standard chamfer tool?
The four sharpened cutters stay in contact with the brass all the way around, so the tool cuts cleanly instead of chattering or jumping off the case mouth. That helps keep the chamfer and deburr square, which supports more consistent bullet seating. The extra blades also tend to make the cut feel smoother in hand.
Can this tool be used with the Hornady Lock-N-Load Quick Change Hand Tool?
This is a complete, standalone double-ended hand tool with a knurled grip, so you use it on its own with no power tool required. Hornady does offer case prep accessories with 8-32 threads that fit their Lock-N-Load system, so if you prefer a powered or quick-change setup, there are companion options in the same lineup.





Reviews
There are no reviews yet.