$80.70
Out of stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Griffin built the Minimalist for the crowd that wants a clean, short muzzle device that also works as the front half of a suppressor setup. It's machined from 17-4 PH stainless steel and finished in a black QPQ coating, so it shrugs off carbon, heat, and weather without much babying. The three-tine design does a real job on visible flash, and Griffin engineered anti-resonance flutes into the prongs so you don't get that trademark tuning-fork ping every three-prong owner knows too well.
At right around 2.9 ounces and only 1.8 inches long, this thing is genuinely compact. Griffin figures it runs roughly 40% lighter than most competing suppressor mounts, which matters when you're hanging a can off a short barrel and don't want a bunch of extra weight out front slowing down your swings. Folks running SBRs and pistols tend to gravitate toward it for exactly that reason, and plenty report it beats out a standard A2 birdcage on flash on shorter barrels.
The taper-mount design is the whole point. Instead of timing prongs to the top like a typical flash hider, you just thread it on and torque to spec, since the three tines are symmetric. That taper interface then gives Griffin taper-mount silencers a repeatable, solid lockup with minimal point-of-impact shift when you pull the can off and put it back on. It plays nice with the RECCE, Paladin, Sportsman, and Optimus families, and the Minimalist series specifically supports the Optimus 9 mid-size configuration.
The big draw for a lot of owners is buying a couple of these, putting one on each rifle, and floating a single Griffin can between .223/5.56, 300 BLK, and other hosts. Threads are 1/2-28, so it drops onto standard AR pattern .223/5.56 barrels. If you want to keep the threads protected when you're running bare, Griffin's Taper Mount Thread Protector is a matching add-on worth grabbing.
The taper-mount interface pairs with Griffin's RECCE, Paladin, Sportsman, and Optimus series silencers. The Minimalist series specifically supports the Optimus 9 mid-size configuration, along with the Optimus micro when you add a taper extension. You can also adapt it to some other-brand cans using Griffin's Plan-A taper mount adapters.
No timing required. The three tines are symmetric all the way around, so you just thread it onto your 1/2-28 barrel and torque it to spec. That also makes swapping it between hosts quick and painless.
Griffin built anti-resonance flutes into the prongs specifically to kill the tuning-fork ring that plagues a lot of three-prong flash hiders. Owners consistently note that it stays quiet in that regard while still doing solid work on visible flash.
It's a favorite for SBRs and pistols since it's only about 1.8 inches long and keeps the profile tight. Users running short barrels have reported noticeably better flash reduction than a standard A2 birdcage. The light 2.9-ounce weight also keeps a short setup feeling responsive out front.
| UPC | 791154082294 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | TMMFH1228 |
| Caliber/Gauge | .223 REM/5.56 NATO |
| Color | Black |
| Model | |
| Product Type | Flash Hider |
| Thread Pattern | 1/2"-28 |
You must be logged in to post a review.
Reviews
There are no reviews yet.