0
0

Griffin Armament FlashComp 1/2×28 Compensator 5.56 Taper Mount

UPC: 791154081297

$104.45

5 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Most muzzle devices force you to pick a lane. Want recoil reduction? Get a brake and deal with the flash and concussion. Want flash suppression? Give up the muzzle control. The Griffin Armament FlashComp splits the difference the smart way, blending precisely calculated gas ports with three-prong flash tines so you get a flatter, softer rifle without lighting up the whole range at dusk. Built off Griffin's proven Hammer Comp design, this latest generation keeps the muzzle neutral so your dot stays put during quick follow-up shots.

Why the FlashComp Earns Its Spot on Your Barrel

Griffin machines each FlashComp from heat-treated 17-4 PH billet stainless steel, then coats it in a tough Melonite QPQ finish that shrugs off carbon and corrosion. The 1/2×28 right-hand threads fit standard .223 Rem and 5.56 NATO barrels, and the mid-length format adds meaningful performance without turning your rifle into a boat oar. Timing shims come in the box, so you can index the device correctly without hunting down a crush washer alternative, and the design works fine for pin-and-weld setups on shorter barrels.

Taper Mount FlashComp: A Suppressor Host That Pulls Double Duty

Here's where this device really separates itself. The Universal Taper Mount interface gives you fast, repeatable attachment for Griffin Recce, Paladin, EXPLORR, and Sportsman silencers with the kind of solid lockup that keeps your zero honest between mounting cycles. Even better, the FlashComp includes a sacrificial baffle that takes the brunt of muzzle blast, which extends the service life of your can. Shooting without the suppressor? Thread on the included taper mount thread protector and keep the interface clean.

Whether you're setting up a dedicated suppressor host or just want one device that handles recoil, muzzle rise, and flash without compromise, the FlashComp is a hard combination to beat. It's made in the USA and backed by Griffin's reputation for muzzle devices that hold up to hard use.

Key Specifications

  • Manufacturer: Griffin Armament
  • Manufacturer Part Number: TFC556-12
  • UPC: 791154081297
  • Caliber: .223 Rem / 5.56 NATO
  • Thread Pitch: 1/2×28 RH
  • Material: Heat-treated 17-4 PH billet stainless steel
  • Finish: Black Melonite (QPQ)
  • Overall Length: 2.37 in
  • Diameter: 1.075 in
  • Product Type: Compensator / Flash Hider Hybrid
  • Suppressor Interface: Universal Taper Mount (Recce, Paladin, EXPLORR, Sportsman)
  • Sacrificial Baffle: Yes
  • Made In: USA

What’s Included

  • FlashComp 1/2×28 muzzle device
  • Timing shim set
  • Taper mount thread protector

Frequently Asked Questions

Which suppressors work with the Griffin FlashComp taper mount?

The FlashComp uses Griffin's Universal Taper Mount interface, which pairs directly with their Recce, Paladin, EXPLORR, and Sportsman silencers. The tapered shoulder gives you fast attachment with solid, repeatable lockup. If you run a different brand of can, Griffin's Plan-A taper mount adapters can bridge the gap in many cases.

Does the FlashComp come with a crush washer for installation?

No crush washer here, and that's by design. Griffin includes a set of timing shims instead, which let you index the device precisely without deforming a washer. Shim installation is also the preferred method when you plan to mount a suppressor, since it keeps the taper shoulder square to the bore.

Is the Griffin FlashComp loud like a traditional muzzle brake?

It sits comfortably between a brake and a flash hider. The ports are tuned to reduce recoil and keep the muzzle neutral, while the three-prong tines knock down flash, so you get real recoil control without the harsh side blast of a dedicated competition brake. It's a solid choice for a general-purpose carbine.

Can I pin and weld the FlashComp to a shorter barrel?

Yes, the design is compatible with pin-and-weld installation, which is a common route for bringing a 14.5 inch barrel up to a 16 inch overall length. Just keep in mind that permanently attaching it means committing that barrel to the taper mount system, which most Griffin suppressor owners consider a feature rather than a drawback.

Additional information

UPC

791154081297

Manufacturer

Manufacturer Part Number

TFC556-12

Caliber/Gauge

.223 REM/5.56 NATO

Color

Black

Product Type

Compensator

Reviews

There are no reviews yet.

Be the first to review “Griffin Armament FlashComp 1/2×28 Compensator 5.56 Taper Mount”