0
0

Forster Neck Reamer #257 .2595 in for .25 Caliber (NR1257)

UPC: 757253004902

$31.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you've ever chased down flyers and suspected uneven neck walls were part of the problem, the Forster Neck Reamer #257 is the tool that takes that variable off the table. Ground to a true .2595 inch diameter for .257 (quarter-bore) cartridges like the .257 Roberts, .250 Savage, and .25-06 Remington, it shaves excess brass from the inside of the case neck so your necks end up with consistent wall thickness from one piece to the next. That uniformity is what helps even out neck tension and keep chamber pressure predictable, which shows up on paper as tighter groups.

The reamer is machined from high grade, wear-resistant tool steel and uses a staggered tooth cutting design. That tooth layout is the detail that matters most in the field, because it slices through brass smoothly instead of grabbing and chattering the way a single-flute cutter can. The result is a clean interior neck wall without the gouging or galling that would defeat the whole purpose.

How the Forster Neck Reamer #257 Fits Your Setup

This reamer is built to drop into the cutter of a Forster case trimmer, replacing the standard pilot. It works with the Original, Classic, and Power Case Trimmers, so if you already run one of those on your bench, you're ready to go with no extra hardware. Being ground slightly larger than bullet diameter, it leaves a touch of clearance so your sized necks still grip the bullet correctly.

Getting the Most From the #257 Reamer

Timing matters with inside neck reaming. Forster designs these to be used on cases that have been fired with a full load, and the reaming should happen after firing but before your neck or full-length sizing step. Running fired, untrimmed cases through the reamer first lets you follow up with sizing and trimming to land on clean, concentric necks. It's a simple addition to the case prep routine that pays off for anyone loading quarter-bore wildcats or chasing finer accuracy out of a standard .25 caliber rifle.

Key Specifications

  • Manufacturer: Forster Products
  • Manufacturer Part Number: NR1257
  • UPC: 757253004902
  • Caliber: .25 Caliber (.257)
  • Reamer Diameter: 0.2595 in
  • Type: Inside Neck Reamer
  • Material: High grade, wear-resistant tool steel
  • Cutting Design: Staggered tooth
  • Compatibility: Forster Original, Classic, and Power Case Trimmers
  • Quantity: 1
  • Country of Origin: USA
  • Shipping Weight: 0.0188 lb

What’s Included

  • One Forster Neck Reamer #257 (.2595 in, NR1257)

Frequently Asked Questions

What does the Forster Neck Reamer #257 do?

It removes excess brass from the inside walls of .25 caliber case necks so your neck wall thickness stays consistent from case to case. That uniformity helps even out neck tension and keeps chamber pressure more predictable, which generally means tighter groups. It replaces the pilot in a Forster case trimmer and cuts the inside of the neck as the case feeds in.

Which case trimmers does the #257 reamer work with?

It mounts in the cutter of the Forster Original, Classic, and Power Case Trimmers in place of the standard pilot. If you already own one of those trimmers, no additional equipment is needed. It is designed specifically for that Forster system rather than as a standalone hand tool.

When should I use the neck reamer in my reloading process?

Forster recommends reaming after the case has been fired with a full load and before the neck or full-length sizing step. The reamer is meant to run on fired, unsized, untrimmed cases, then you follow up with sizing and trimming. A good rule of thumb is to ream after firing or turn after sizing.

Why is the reamer .2595 inches instead of exactly .257?

Standard Forster neck reamers are ground roughly .0025 to .003 inch larger than bullet diameter, which puts the #257 at .2595 inches. That slight oversize leaves proper clearance so your necks still hold the bullet correctly once sized. It is intentional and keeps neck tension where it should be.

Additional information

UPC

757253004902

Manufacturer

Manufacturer Part Number

NR1257

Caliber/Gauge

.25 Caliber

Shipping Weight

0.0188

Reviews

There are no reviews yet.

Be the first to review “Forster Neck Reamer #257 .2595 in for .25 Caliber (NR1257)”