0
0

Daniel Defense DDM4 M4A1 5.56 NATO 14.5″ FDE RIS II Rifle

UPC: 815604015547

$2,418.00

21 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

There are AR-15s that look the part, and then there is the DDM4 M4A1. This is the civilian version of the setup Daniel Defense built for US Special Operations Command, right down to the Flat Dark Earth RIS II quad rail that has been part of the SOPMOD Block II program since 2005. The 14.5-inch cold hammer forged barrel wears a pinned and welded Daniel Defense flash suppressor that brings the whole package to 16 inches, so you get that quick-handling carbine length in a standard rifle configuration. It is a clone-correct build without any of the guesswork of piecing one together yourself.

What Makes the DDM4 M4A1 Barrel Worth Talking About

Daniel Defense hammer forges its barrels from chrome moly vanadium steel, chrome lines the bore, and MP tests every one before it leaves Georgia. The 1:7 twist stabilizes everything from light varmint loads to heavy 77 grain match ammo, and the M4 profile with a pinned low-profile gas block keeps the carbine-length gas system running smooth. The bolt carrier group is an M16 profile unit, chrome lined and MP tested with a properly staked gas key, riding on an H buffer. These are the details that make DD rifles run for tens of thousands of rounds.

Living With the M4A1 RIS II

The RIS II handguard is machined from 6061-T6 aluminum and gives you uninterrupted Picatinny real estate on all four sides, with Santoprene rail panels included to keep your support hand comfortable when things heat up. The GRIP-N-RIP charging handle works independently from either side, and the lower features a flared magwell and rear QD swivel point. DD's SoftTouch overmolded buttstock and pistol grip round out the furniture, and the six-position receiver extension lets you dial in length of pull from 32.25 to 35.8 inches.

It ships with a 32-round magazine and a full-latch hard case, ready for an optic since it comes without sights. For anyone who wants the genuine article instead of a lookalike, this is the one.

Key Specifications

  • Model: DDM4 M4A1
  • MPN: 02-088-06027-011
  • UPC: 815604015547
  • Caliber: 5.56 NATO / .223 Rem
  • Barrel Length: 14.5" (16" OAL with pinned and welded flash suppressor)
  • Barrel: Cold hammer forged chrome moly vanadium, chrome lined, 1:7 twist
  • Gas System: Carbine-length, direct impingement, pinned low-profile gas block
  • Handguard: RIS II quad rail, 6061-T6 aluminum, Flat Dark Earth
  • Receivers: CNC machined 7075-T6 aluminum, Type III hard coat anodized
  • Bolt Carrier Group: M16 profile, chrome lined, MP tested, staked gas key
  • Charging Handle: GRIP-N-RIP ambidextrous
  • Stock: 6-position Daniel Defense buttstock with SoftTouch overmolding
  • Capacity: 32+1 rounds
  • Overall Length: 32.25" – 35.8"
  • Sights: None (optics ready)
  • Muzzle Thread: 1/2"x28

What’s Included

  • Daniel Defense DDM4 M4A1 rifle
  • One 32-round Daniel Defense magazine
  • Daniel Defense full-latch impact plastic case
  • Santoprene rail panels
  • Owner's manual

Frequently Asked Questions

Does the DDM4 M4A1's 14.5-inch barrel require a tax stamp?

No. The Daniel Defense flash suppressor is permanently pinned and welded to the barrel, bringing the overall barrel length to 16 inches. That means it's treated like any standard rifle, no stamp or extra wait involved. The tradeoff is you can't swap the muzzle device without cutting it off.

Does the Daniel Defense M4A1 come with sights?

It ships without sights, so plan on adding an optic, a red dot, or a set of backup irons. The full-length top rail on the RIS II gives you plenty of room to run a magnifier or night vision setup alongside your primary optic, which is exactly what this rail was designed for.

Is the RIS II quad rail the same one used by SOCOM?

Yes, this is the same Rail Interface System II that Daniel Defense has supplied for the SOPMOD Block II program since 2005. It's machined from 6061-T6 aluminum with a Type III hard coat anodized finish in Flat Dark Earth. If you're building a clone-correct Block II rifle, this is the genuine article straight from the factory.

Will the DDM4 M4A1 handle a suppressor?

The flash suppressor is pinned and welded, so you can't thread a can directly onto the muzzle the way you would on a standard threaded barrel. Some suppressor mounting systems clamp over existing muzzle devices, but most direct-thread and quick-detach setups won't work here. If suppressed shooting is your main goal, keep that in mind before buying.

Additional information

UPC

815604015547

Manufacturer

Manufacturer Part Number

02-088-06027-011

Action

ATF Type

MODERN SPORTING RIFLE

Barrel Finish

Black Phosphate

Barrel Length

14.5''

Caliber/Gauge

.223 REM/5.56 NATO

Capacity

32+1-Round

Color

Black

Length

32.25''-35.8''

Magazine Included

1 x 32-Round

Model

Number of Magazines

1 32 rd.

Package Height

4.2

Package Width

10.9

Product Type

AR

Safety

Ambidextrous

Shipping Weight

12.95

Sights

No

State Restriction (CA)

NO DIRECT SHIP TO CALIFORNIA

State Restriction (IL)

NO SALE TO ILLINOIS PICA

State Restriction (OR)

NO SALE TO OREGON

State Restriction (RI)

NO DIRECT SHIP TO RHODE ISLAND

State Restriction (WA)

NO DIRECT SHIP TO WASHINGTON

Thread Pattern

1/2"x28

Reviews

There are no reviews yet.

Be the first to review “Daniel Defense DDM4 M4A1 5.56 NATO 14.5″ FDE RIS II Rifle”