0
0

Daniel Defense DD4 M4A1 RIII 5.56 NATO 14.5in Rifle FDE/Black

UPC: 818773022927

$2,588.00

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Daniel Defense built its reputation on the RIS II rail that SOCOM ran for years, and the DD4 M4A1 RIII is the natural next step. The old quad rail gets replaced with a 12.5 inch RIS III handguard that keeps the rock-solid 6-bolt, bolt-up attachment system but sheds weight and swaps cheese-grater picatinny for clean M-LOK slots at the 3, 6, and 9 o'clock positions. The FDE rail over black receivers and furniture gives this one a sharp two-tone look that stands out on the rack without going overboard.

What Makes the DD4 M4A1 RIII Different

The heart of the rifle is a 14.5 inch cold hammer forged barrel in chrome moly vanadium steel with a 1:7 twist, chrome lining, and HP/MPI testing. A Daniel Defense flash suppressor is pinned and welded up front to bring the overall barrel length to 16 inches. Pair that barrel with the mid-length gas system and pinned low-profile gas block and you get noticeably softer recoil than a carbine-gas gun, plus reduced wear on internals over the long haul. It is the same barrel and gas configuration that made the URG-I concept so popular, straight from the factory.

Ambidextrous From the Ground Up

This is where the DD4 lower earns its keep. The safety selector, bolt catch, and magazine release are fully ambidextrous, so left-handed folks can run everything without shifting their firing grip, and righties gain support-hand options they will use more than they expect. The GRIP-N-RIP charging handle is ambi as well, and the flared magazine well makes reloads quick and forgiving. Daniel Defense's own buttstock and pistol grip round out the furniture, and both receivers are CNC machined from 7075-T6 aluminum with Type III hard coat anodizing.

Setting Up Your M4A1 RIII

The full-length flattop picatinny rail gives you plenty of room for an optic, magnifier, or backup irons, since sights are not included. QD sockets on the rail and rear of the receiver make sling mounting simple. Add a light and you have a rifle ready for duty, defense, or serious range time right out of the box.

Key Specifications

  • Model: DD4 M4A1 RIII
  • Manufacturer Part Number: 02-191-04238-047
  • UPC: 818773022927
  • Caliber: 5.56 NATO / .223 Rem
  • Action: Semi-Auto, Direct Impingement
  • Barrel: 14.5in Cold Hammer Forged CMV, Chrome Lined, HP/MPI Tested
  • Twist Rate: 1:7
  • Muzzle Device: Pinned & Welded Daniel Defense Flash Suppressor (16in overall barrel length)
  • Gas System: Mid-Length with Pinned Low-Profile Gas Block
  • Handguard: 12.5in RIS III M-LOK, FDE, 6-Bolt Bolt-Up System
  • Receivers: CNC Machined 7075-T6 Aluminum, Type III Hard Coat Anodized
  • Controls: Fully Ambidextrous Safety, Bolt Catch, Mag Release, GRIP-N-RIP Charging Handle
  • Bolt Carrier Group: M16 Profile
  • Overall Length: 34.75in
  • Color: FDE Rail / Black Receivers and Furniture
  • Sights: None, Full-Length Flattop Picatinny Rail

What’s Included

  • Daniel Defense DD4 M4A1 RIII rifle
  • 1 x 32-round magazine
  • Daniel Defense buttstock and pistol grip (installed)

Frequently Asked Questions

Does the Daniel Defense DD4 M4A1 RIII come with sights or an optic?

No, this rifle ships without sights. The full-length flattop picatinny rail on top of the receiver and RIS III handguard gives you a clean slate for a red dot, LPVO, or backup iron sights. Plan on adding an optic before your first range trip.

What is the difference between the M4A1 RIII and the original Daniel Defense M4A1?

The RIII swaps the RIS II picatinny quad rail for a lighter 12.5 inch RIS III handguard with M-LOK slots, while keeping the same tough 6-bolt attachment system. It also moves to a DD4 lower with fully ambidextrous controls and runs a mid-length gas system for softer recoil. Same proven 14.5 inch cold hammer forged barrel formula, just refined.

Why is the flash hider pinned and welded on the M4A1 RIII?

The Daniel Defense flash suppressor is permanently attached to the 14.5 inch barrel, which brings the overall barrel length to 16 inches. That lets you get the handling of the shorter military-length barrel in a standard rifle configuration. Keep in mind the muzzle device is not removable, so this is not the model to pick if you plan on swapping muzzle devices down the road.

Is the mid-length gas system on the DD4 M4A1 RIII reliable with a 14.5 inch barrel?

Yes, and it is one of the best features of this rifle. The mid-length system places the gas port farther from the chamber, which lowers port pressure, softens felt recoil, and reduces wear on the bolt carrier group. It is the same barrel and gas block pairing used in the URG-I uppers Daniel Defense built for the military.

Additional information

UPC

818773022927

Manufacturer

Manufacturer Part Number

02-191-04238-047

Action

ATF Type

RIFLE

Barrel Finish

Black

Barrel Length

14.5"

Caliber/Gauge

.223 REM/5.56 NATO

Capacity

32 + 1

Color

BI-TONE

Length

36

Magazine Included

1 x 30-Round

Model

Number of Magazines

1 32 rd.

Package Height

10.8

Package Width

4.0

Product Type

Rifle

Safety

Ambidextrous

Shipping Weight

12.75

Sights

No Sights

State Restriction (CA)

NO DIRECT SHIP TO CALIFORNIA

State Restriction (IL)

NO SALE TO ILLINOIS PICA

State Restriction (OR)

NO SALE TO OREGON

State Restriction (RI)

NO DIRECT SHIP TO RHODE ISLAND

State Restriction (WA)

NO DIRECT SHIP TO WASHINGTON

Reviews

There are no reviews yet.

Be the first to review “Daniel Defense DD4 M4A1 RIII 5.56 NATO 14.5in Rifle FDE/Black”