0
0

Daniel Defense RIS II M4A1 12.25″ Free-Float Quad Rail Handguard, Black

UPC: 852548002561

$542.00

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Daniel Defense RIS II M4A1 is one of the most proven quad rails you can bolt onto an AR-pattern rifle. Daniel Defense developed it at the request of USSOCOM for the SOPMOD Block II program, and it's the same handguard you've seen in countless deployment photos going back to 2005. If you want that clone-correct SOCOM look or you're just after one of the toughest rails on the market, this is the real deal, not a copy.

What Makes the RIS II M4A1 Tick

The heart of this system is Daniel Defense's patented Bolt-Up barrel nut design. A hardened steel barrel nut torques to the receiver, then the two-piece rail clamps down with a 6-bolt setup that pulls everything tight and keeps it there. That free-floating design isolates the barrel from any pressure you put on the handguard, which helps with consistency downrange. The full 1913 Picatinny quad rail gives you 3, 6, 9, and 12 o'clock real estate for lights, lasers, grips, and sights, and the uninterrupted top rail runs flush with the upper for a continuous sighting plane with no gap.

Build Quality on the M4A1 RIS II

It's precision machined from aircraft-grade 6061-T6 aluminum and finished with a Mil-Spec Type III hard coat anodize in black, so it holds up to hard use and rough handling. The rail measures 12.25 inches and tips the scale right around 17.7 ounces. It's heavier than a modern M-LOK setup, but that heft comes from the rigid construction that made it battle-tested in the first place.

Setting Up Your RIS II

This rail is designed to run with a low-profile gas block, so a fixed front sight post won't clear it unless you go with the FSP version instead. Installation calls for the Daniel Defense Bolt-Up System Barrel Nut Wrench, which is sold separately, and the barrel nut torques to spec during setup. The two-piece layout is a nice bonus for cleaning too, since dropping the lower rail lets you clear out any debris that builds up underneath.

Key Specifications

  • Manufacturer: Daniel Defense
  • Model: M4A1 RIS II
  • Manufacturer Part Number: 01-004-08001-006
  • UPC: 852548002561
  • Handguard Style: Free-Float Quad Rail (Two-Piece)
  • Rail Type: Mil-Std 1913 Picatinny
  • Length: 12.25 in
  • Weight: 17.7 oz
  • Width: 2.23 in
  • Inside Diameter: 1.15 in
  • Material: Aircraft-Grade 6061-T6 Aluminum
  • Finish: Mil-Spec Type III Hard Coat Anodized, Black
  • Barrel Nut: Hardened Steel Bolt-Up System
  • Fasteners: Grade 8 Military Specification
  • Attachment: 6-Bolt Bolt-Up System
  • Origin: Made in the USA

What’s Included

  • M4A1 RIS II two-piece handguard assembly (upper and lower rail sections)
  • Hardened steel Bolt-Up barrel nut and Bolt-Up plate
  • Grade 8 mounting hardware
  • Installation instructions

Frequently Asked Questions

Do I need a special tool to install the Daniel Defense RIS II M4A1?

Yes. Installation requires the Daniel Defense Bolt-Up System Barrel Nut Wrench, which is sold separately. The barrel nut torques down to spec, then the two-piece rail clamps over it with the 6-bolt system. You'll also want a proper vise and receiver block to hold everything steady during the job.

Will the RIS II M4A1 work with a fixed front sight post?

No, this standard M4A1 version is built to run with a low-profile gas block and does not have a cutout for a fixed front sight post. If your rifle keeps its factory triangle front sight, you'll want the FSP variant of this rail instead, which has the cutout to clear it. Check what gas block setup you're running before ordering.

What makes the RIS II different from a modern M-LOK handguard?

The RIS II is a full quad rail using Mil-Std 1913 Picatinny along all four sides, so it accepts any Picatinny-mount accessory without needing rail sections. It's heavier than an M-LOK rail, but that weight comes from the rigid, battle-tested construction. It's the go-to pick if you want the clone-correct SOPMOD look or your gear is already set up for Picatinny.

Why is the RIS II M4A1 a two-piece design?

The two-piece layout comes straight from the USSOCOM requirement to mount an M203 grenade launcher, which the lower rail can be removed to accommodate. For everyday use, dropping the lower rail also makes cleaning easier since you can clear debris that collects underneath. The upper rail stays put and keeps your top-mounted optics zeroed.

Additional information

UPC

852548002561

Manufacturer

Manufacturer Part Number

01-004-08001-006

Color

Black

Length

12.5

Package Height

7.0

Package Width

6.0

Product Type

Accessory-Rails

Shipping Weight

1.5

Style

Free Float

Reviews

There are no reviews yet.

Be the first to review “Daniel Defense RIS II M4A1 12.25″ Free-Float Quad Rail Handguard, Black”