Description
Daniel Defense built the DDM4 V7 Pro for multi-gun competition, and it shows in every detail. The heart of the rifle is an 18-inch cold hammer forged barrel in chrome moly vanadium steel, chrome lined with a 1:7 twist and DD's S2W profile. Pair that with a rifle-length gas system and you get a noticeably softer recoil impulse than a typical carbine setup, which means faster splits and less fatigue over a long day of shooting. Up front, the Gen II Muzzle Climb Mitigator vents gas through calibrated ports to keep the muzzle flat between shots, and it threads onto a standard 1/2×28 pattern if you'd rather run your own device.
The V7 Pro Trigger Advantage
Most factory rifles need a trigger swap before they're competition ready. Not this one. Daniel Defense installs a Geissele Super Dynamic 3-Gun trigger at the factory, a single-stage design with a light, short pull and a fast reset that rewards good fundamentals. Between the trigger, the long sight radius, and that stiff S2W barrel, this rifle has a well-earned reputation for stacking rounds well past the distances most 5.56 guns get pushed to.
Handling and Real Estate on the DDM4 V7 Pro
The MFR 15.0 handguard free-floats the barrel and keeps weight down while giving you M-LOK slots at seven positions plus an uninterrupted Picatinny rail up top. There's room for an LPVO, offset dot, lights, and whatever else your setup calls for. The GRIP-N-RIP charging handle and ambidextrous safety work equally well from either shoulder, and DD's soft-touch overmolded stock and grip stay comfortable through high round counts. This configuration wears a Flat Dark Earth Cerakote finish and ships with one 10-round magazine.
At 7.4 pounds unloaded, the V7 Pro swings quick for an 18-inch gun. Whether you're chasing podium finishes, ringing steel at distance, or just want a 5.56 rifle that does everything well, this one earns its spot in the safe.
Key Specifications
- Manufacturer Part Number: 02-128-11090-055
- UPC: 818773023139
- Caliber: .223 Rem / 5.56 NATO
- Action: Semi-Auto, Direct Impingement
- Barrel: 18" Cold Hammer Forged, Chrome Moly Vanadium, Chrome Lined, S2W Profile
- Twist Rate: 1:7
- Gas System: Rifle-Length with Pinned Low-Profile Gas Block
- Muzzle Device: Daniel Defense Muzzle Climb Mitigator, Gen II
- Thread Pattern: 1/2"x28
- Trigger: Geissele SD-3G Single Stage
- Handguard: MFR 15.0 M-LOK Free-Float Rail
- Stock: Daniel Defense 6-Position Collapsible
- Safety: Ambidextrous Selector
- Sights: Optic Ready, Uninterrupted Picatinny Top Rail
- Capacity: 10 + 1
- Weight: 7.4 lbs (unloaded)
What’s Included
- Daniel Defense DDM4 V7 Pro rifle
- One 10-round Daniel Defense magazine
- Owner's manual
Frequently Asked Questions
What trigger comes installed on the DDM4 V7 Pro?
It ships from the factory with a Geissele Super Dynamic 3-Gun (SD-3G) single-stage trigger. It has a light, short pull with a quick reset designed for fast follow-up shots. That's a genuine upgrade over the mil-spec triggers found in most factory ARs, and it saves you the cost and hassle of swapping one in yourself.
Does the Daniel Defense DDM4 V7 Pro come with sights or an optic?
No, this rifle is optic ready and ships without sights. The uninterrupted Picatinny top rail runs the full length of the receiver and 15-inch handguard, so you have plenty of room for an LPVO, red dot, magnifier, or backup irons. The long rail also gives you maximum sight radius if you prefer rail-mounted iron sights.
Is the barrel on the V7 Pro chrome lined?
Yes. The 18-inch barrel is cold hammer forged from chrome moly vanadium steel, chrome lined, and HP/MPI tested. The 1:7 twist rate stabilizes a wide range of bullet weights, including heavier 69 to 77 grain match loads that shine at distance.
Can I run a suppressor or different muzzle device on this rifle?
The muzzle is threaded in the standard 1/2×28 pattern, so it accepts most common 5.56 muzzle devices and suppressor mounts. From the factory it wears Daniel Defense's Gen II Muzzle Climb Mitigator, which ports gas to fight recoil and muzzle rise. It comes off easily if you want to install your own setup.





Reviews
There are no reviews yet.