Description
There is a reason the Mountain Pro sits at the top of Browning's bolt gun lineup. This X-Bolt 2 version takes an already proven backcountry rifle and refines the parts that matter, starting with a redesigned receiver that cycles smoother and a new DLX trigger you can tune to your liking. Chambered in 7mm PRC with a 24 inch spiral-fluted sporter barrel and a 1:8 twist, it stabilizes the heavy, high-BC bullets this cartridge was designed around, which makes it a natural fit for elk, mule deer, and anything else living past 400 yards.
Built Light Where the X-Bolt 2 Mountain Pro Earns Its Name
The one-piece carbon fiber stock is filled with noise-dampening foam and stays rigid for offhand shots, and even the bedding block is compression-molded carbon fiber. Browning machined excess steel off the Pro receiver, spiral fluted the bolt, and fitted an aluminum bolt handle with a hollow knob, all in the name of shaving ounces. The result comes in around 6.7 pounds bare, which your shoulders will appreciate on day three of a pack-in hunt. Cerakote over the stainless barreled action shrugs off weather that would eat a blued gun alive.
Fit and Function on the Mountain Pro 7mm PRC
The adjustable comb dials in eye-to-scope alignment in fine increments, handy if you run a large objective optic, and length-of-pull spacers let you fit the stock to your frame and your layers. A short 60 degree bolt lift keeps your knuckles clear of the scope, the tang safety pairs with a bolt unlock button for safe chamber checks, and the fore-end includes a Picatinny rail section for a bipod plus flush QD sling cups. The 5/8×24 threaded muzzle wears Browning's Recoil Hawg brake, which cuts felt recoil dramatically, and a thread protector is included if you would rather run it clean or swap on a suppressor.
Feeding comes from a 3+1 rotary magazine that presents rounds straight into the chamber, and the receiver is drilled and tapped for Browning's X-Lock mounting system. Bring your own glass and this rifle is ready for the high country.
Key Specifications
- Manufacturer Part Number: 036086298
- UPC: 023614865414
- Caliber: 7mm PRC
- Action: Bolt Action, Long Action
- Barrel Length: 24 in, spiral fluted sporter contour
- Twist Rate: 1:8
- Muzzle Threads: 5/8×24 with Recoil Hawg brake
- Capacity: 3+1 rotary magazine
- Stock: Carbon fiber, adjustable comb and LOP
- Finish: Smoked Bronze Cerakote
- Trigger: Adjustable DLX
- Safety: Top tang with bolt unlock button
- Overall Length: 44.75 in
- Weight: Approx. 6.7 lb
- Sights: None, drilled and tapped for X-Lock mounts
What’s Included
- Browning X-Bolt 2 Mountain Pro rifle
- One 3-round rotary magazine
- Recoil Hawg muzzle brake (installed)
- Muzzle thread protector
- Owner's manual
Frequently Asked Questions
Is the X-Bolt 2 Mountain Pro suppressor ready?
Yes. The 24 inch barrel is threaded 5/8×24, which is the standard pattern for most big-bore suppressors and muzzle devices. The Recoil Hawg brake comes installed from the factory, and a thread protector is included so you can run the muzzle bare or mount a can of your own.
How heavy is the X-Bolt 2 Mountain Pro in 7mm PRC?
This configuration comes in around 6.7 pounds unloaded, which is impressively light for a long action magnum rifle with a 24 inch barrel. The carbon fiber stock, skeletonized receiver, spiral-fluted bolt, and aluminum bolt handle all contribute to the weight savings. Add a typical scope and sling and you are still looking at a very packable mountain setup.
Does 7mm PRC kick hard in a rifle this light?
The 7mm PRC is a stout cartridge, but this rifle is set up well to tame it. The included Recoil Hawg brake reduces felt recoil substantially, and the Inflex recoil pad soaks up what is left. Most people who shoot it braked describe the recoil as very manageable, closer to a mild short action round than a magnum.
What do I need to mount a scope on this rifle?
The receiver ships without sights and is drilled and tapped for Browning's X-Lock mounting system, which uses four screws per base instead of the usual two for a more secure hold. You will need X-Lock rings or bases sized for your scope tube. The adjustable comb makes it easy to get proper cheek weld even with larger objective optics.




Reviews
There are no reviews yet.