$33.99
6 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Bronze brushes do the heavy lifting when carbon and copper start building up, and Sinclair packs a lot of scrubbing power into these .45 caliber brushes. The phosphor bronze bristles carry twice the fill of generic brushes, with bristle coverage running all the way to the tip. More bristles mean more contact against the rifling, so fouling comes loose faster and you spend less time working the rod back and forth.
Construction is where these earn their keep. The stem is cold welded to a looped-and-wound brass core built to hold up to around 200 pounds of pull force without the bristles tearing away from the core. That matters on a tight bore, where a cheap brush can come apart and leave you fishing bristles out of the barrel. Each stem is also threaded to fit standard 8-32 rods and machined with a clean starter thread, so it spins onto your rod easily instead of cross-threading.
Bronze brushes are consumable by nature. Copper solvents and ammonia-based cleaners are hard on bronze, and most people toss a brush once it starts feeling loose in the bore rather than trying to nurse it along. Buying a dozen at once means you always have a fresh one ready, which is really the whole point. A worn brush that drags loosely through the barrel isn't scrubbing anything, and swapping to a new one is the quickest fix for stubborn fouling.
The caliber is stamped right on the stem, so there's no guessing whether you grabbed the .45 or something close to it. These are sized for .451 to .454 bores, covering common .45 caliber rifles. Push chamber to muzzle, run your passes, and rinse the brush in solvent when you're done to get more life out of it.
Yes, each brush uses the standard 8-32 male thread found on most rifle cleaning rods, jags, and handles. The stem is machined with a clean starter thread so it screws on without cross-threading. If your rod accepts 8-32 attachments, these drop right in.
They're sized for .451 to .454 diameter bores, which covers common .45 caliber rifles. The caliber is stamped on the stem so you can confirm you grabbed the right size before running it down the barrel. Match your bore to the brush and you're set.
Bronze bristles wear over time, especially when used with copper and ammonia-based solvents that break the metal down. Most people replace a brush once it starts feeling loose in the bore, since a worn brush stops scrubbing effectively. Having a dozen on hand means you always have a fresh one ready when the old one is done.
Push the brush in one direction, chamber to muzzle, rather than reversing mid-barrel. When you're finished, rinse it in solvent or a degreaser to clear out the copper cleaner that would otherwise eat away at the bronze. Store it dry and it'll hold up through plenty of cleaning sessions.
| UPC | 608060400558 |
|---|---|
| Manufacturer | |
| Caliber/Gauge | .45 Caliber |
| Quantity | 12 |
You must be logged in to post a review.
Reviews
There are no reviews yet.