Description
The Cynergy has always been the Browning that does things its own way, and the CX version is the one built to cross over between clays and the field. The heart of it is the MonoLock Hinge, which merges the monobloc and hinge into one piece and gives the action a huge pivot surface compared to traditional trunnion designs. That is what lets Browning shave the receiver down so low, and it is the first thing you notice when you break it open. Low profile means your hands sit closer to the bore line, which translates to a gun that swings flat and points where you look.
Why the Cynergy CX Trigger Stands Out
Instead of a hammer-fired setup, the Cynergy CX runs Browning's Reverse Striker ignition with a true mechanical trigger. The result is a break that feels crisp with short locktime and minimal overtravel, and the second barrel fires without needing recoil to set it. Impact Ejectors get a boost from a secondary striker spring, so spent hulls clear the chambers with real authority when you are shooting fast pairs.
A 12 Gauge Built for Clays and the Field
The 30 inch lightweight profile barrels wear a vented top and side rib with ivory front and mid-bead sights, and they are regulated for a 60/40 point of impact, a practical middle ground for sporting clays, skeet, trap for fun, and upland birds. Vector Pro lengthened forcing cones help keep patterns dense and consistent, and the chrome-plated 3 inch chambers handle everything from light target loads to heavier field ammunition. Three extended Midas Grade Invector-Plus chokes in Full, Modified, and Improved Cylinder cover most distances you will encounter.
Fit and Finish on the Browning Cynergy CX
The silver nitride steel receiver is engraved and pairs nicely with the satin-finished Grade I black walnut stock, cut checkering, and gold-plated trigger. An Inflex recoil pad takes the sting out of long practice sessions, and a quarter inch stock spacer lets you fine tune the 14 1/4 inch length of pull. At just under 8 pounds, it carries enough weight to smooth out your swing without wearing you down over a full day of shooting.
Key Specifications
- Model: Cynergy CX
- Manufacturer Part Number: 018709303
- UPC: 023614440840
- Gauge: 12 Gauge
- Chamber: 3", chrome plated
- Barrel Length: 30", lightweight profile, matte blued
- Overall Length: 48"
- Weight: 7 lbs 14 oz
- Length of Pull: 14 1/4"
- Stock: Grade I black walnut, satin finish, Inflex recoil pad
- Receiver: Steel, silver nitride finish, MonoLock Hinge
- Trigger: Reverse Striker mechanical, gold plated
- Sights: Ivory front bead and mid-bead
- Point of Impact: 60/40
- Chokes: Invector-Plus extended Midas Grade (F, M, IC)
- Safety: Top-tang barrel selector/safety
What’s Included
- Browning Cynergy CX over/under shotgun
- Three extended Midas Grade Invector-Plus choke tubes (Full, Modified, Improved Cylinder)
- Choke tube T-wrench
- 1/4" stock spacer for length of pull adjustment
- Owner's manual
Frequently Asked Questions
What is the Browning Cynergy CX best suited for?
The CX stands for crossover, and that is exactly how it shoots. The 60/40 point of impact and 30 inch barrels make it a natural fit for sporting clays and skeet, while the 3 inch chambers and included choke selection let it pull double duty on doves, pheasants, and other upland birds.
How is the Cynergy different from Browning's Citori?
The Cynergy uses a MonoLock Hinge that combines the monobloc and hinge into a single unit, allowing a much lower profile receiver than the Citori's traditional design. It also runs a Reverse Striker mechanical trigger instead of a hammer-fired system, which gives it a crisper break with shorter locktime. Both are proven guns, but the Cynergy feels more modern in the hands.
What choke tubes come with the Cynergy CX and can I buy more?
It ships with three extended Midas Grade choke tubes in Full, Modified, and Improved Cylinder, plus a wrench. The barrels use Browning's Invector-Plus system, which is one of the most widely supported choke patterns out there, so finding additional constrictions from Browning or aftermarket makers like Carlson's or Briley is easy.
Can I adjust the length of pull on this shotgun?
Yes, to a degree. Browning includes a 1/4 inch stock spacer so you can lengthen the standard 14 1/4 inch pull if you need a bit more reach. The Inflex recoil pad can also be swapped for different thicknesses if you want to fine tune the fit further.





Reviews
There are no reviews yet.