$89.99
4 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The Superlative Arms .875" Solid Adjustable Gas Block does something most adjustable blocks don't. Instead of choking down the gas port and holding pressure back, this one uses a patented Bleed Off design that vents excess gas forward and out the front, away from your face. Your rifle only keeps the pressure it needs to cycle the bolt carrier, and everything else gets dumped. The result is a cleaner running system, less heat, noticeably reduced felt recoil, and less blowback in your eyes and nose, which is a big deal on suppressed and short-barreled builds.
The adjustment detent sits on the outside of the block rather than buried in the gas path. That means carbon fouling never seizes the screw, and you don't lose your setting over a long range session. There are 30 locked positions so you can creep up on the perfect tune, and a built-in safety stop keeps you from accidentally backing the screw all the way out. Folks running over-gassed factory rifles tend to notice the difference right away, often dropping back to a lighter buffer once the gas is dialed in properly.
This one is machined from 416 stainless steel and wears a Tan DLC finish that holds up to heat and abrasion. It's sized for a .875" barrel journal and mounts using dual set screws, so make sure your barrel is dimpled or you're comfortable dimpling it for a rock-solid, no-slip fit. At right around 1.8 ounces and a compact 1" length, it tucks neatly under free-float handguards on AR-15, AR-10, and LR-308 pattern builds.
It's a favorite among suppressor users, pencil-barrel builders, and anyone chasing a smoother-cycling, better-behaved rifle. Set it, tune it once, and it pretty much disappears into the build.
Most adjustable gas blocks work by restricting the gas port, which holds pressure back and can lead to carbon buildup and a seized adjustment screw over time. This one bleeds the excess gas forward out the front of the block instead, so your rifle keeps only what it needs to cycle. Because the adjustment detent lives outside the gas path, it won't gum up or lose its setting, and the forward venting keeps blowback out of your face.
It's built for barrels with a .875" gas block journal, so measure that diameter before ordering. It mounts with dual set screws, so a dimpled barrel gives you the most secure, slip-free hold. If your barrel isn't dimpled, plenty of builders use a dimple jig to add one during install.
It's one of the more popular picks for exactly that. Suppressors and short gas systems tend to over-gas a rifle and throw more junk back at the shooter, and the Bleed Off design lets you tune that pressure down while venting the extra gas forward. Users often report smoother cycling and the ability to run a lighter buffer once things are dialed in.
The block offers 30 locked positions so you can fine-tune the gas in small, repeatable steps. A flat on the adjustment screw tells you when you've reached the last position at maximum bleed off, and a built-in safety stop keeps the screw from backing all the way out. Once you find your sweet spot, the detent holds it there through long range sessions.
| UPC | 850051342501 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | SABO-DI-875ST |
| Style | Screw |
You must be logged in to post a review.
Reviews
There are no reviews yet.