$1,000.00
1 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Most people who buy one suppressor end up wanting three more, usually because the first one only works well on one gun. The Raptor 10 Stack from AB Suppressor takes a different approach. With a bore rated up to .375 caliber, this single can covers 9mm, 5.56, .308, and even magnum rifle cartridges, so the same suppressor that quiets your PCC on Saturday can ride on your hunting rifle Monday morning. The 10 Stack is the longest configuration in the Raptor lineup, which means maximum internal volume and the deepest, most pleasant tone the series offers.
Instead of conventional cone baffles that force gases to slam into hard angles, AB's spiral technology peels gas off the bore and sends it spinning, burning off energy as it goes. The practical payoff is noticeably reduced back pressure, less gas in your face on semi-autos, and solid flash reduction to go with the sound suppression. The whole thing is built from 100 percent Grade 5 titanium, so it stays light for its size and carries a full auto rating for when you want to run it hard.
Here is the clever part. The included Reflex mount lets the suppressor extend back over the barrel, adding serious internal volume without stretching the overall length of your firearm. You also get a flush mount in the box for a more traditional direct thread setup on the 5/8×24 pattern, plus an end cap and a six pin tool for service. If you already run QD muzzle devices, the optional Raptor Adapter converts the base threads to the common 1.375×24 pitch so you can pair it with a wide range of mounts on the market.
At 7.2 inches long with a 1.625 inch diameter and a tough black Cerakote finish over titanium, this is a suppressor built to live on multiple hosts for years. For anyone tired of playing matchmaker between cans and calibers, the Raptor 10 Stack is about as close to one-and-done as it gets.
This version is rated up to .375 caliber, which makes it one of the more flexible cans out there. It will run 9mm, 5.56, .308, and magnum rifle cartridges up to .375, so one suppressor can rotate between your pistol caliber carbine, AR, and bolt gun. Just make sure your host has the correct 5/8×24 muzzle threads or an appropriate mount.
AB Suppressor builds the Raptor in lengths from 2 to 10 spiral baffle stacks. The 10 Stack is the longest configuration, giving you the most internal volume and the best sound suppression the Raptor line offers. If quiet is your top priority over compactness, this is the one to get.
The Reflex mount lets the rear of the suppressor extend back over your barrel instead of hanging everything out front. That adds internal volume for better suppression without making your rifle longer overall. A traditional flush mount is also included if you prefer a standard direct thread setup.
Yes, with the optional Raptor Adapter, which converts the base threads to the common 1.375×24 pitch. That opens the door to a wide range of QD mounts already on the market. Out of the box, the can ships with the Reflex mount and a 5/8×24 flush mount.
| UPC | 679065310937 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | F22-410-BB |
| Caliber/Gauge | 9mm |
| Thread Pattern | 5/8"x24 |
You must be logged in to post a review.
Reviews
There are no reviews yet.