$135.52
1 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
If you shoot 6×47 Lapua and chase the smallest groups your rifle is capable of, bullet seating consistency is where a lot of accuracy is won or lost. The L.E. Wilson Micrometer Top Bullet Seater is a chamber-type seater that captures both the case and bullet before the seating stem pushes the bullet straight down into the neck. The case stays put while only the stem moves, so everything is aligned before anything gets pressed home. That design is a big part of why these dies have such a reputation for low runout and excellent concentricity.
This is an inline hand die built for use with an arbor press, though you can tap it with a soft-faced mallet in a pinch. You drop a charged case into the die body, set a bullet on the case mouth, slide it under your press ram, and give it one smooth stroke until the cap bottoms out. The whole cycle takes just a few seconds once you get into a rhythm, and because the case is held stationary while the bullet seats, you get that straight-line alignment Wilson is known for.
The built-in micrometer head is the star here. It reads in .001 inch graduations so you can nudge seating depth up or down precisely and come right back to a previous setting when you're running different loads or bullets. Major adjustments happen through the 3/8 inch to 24 TPI threads in the cap, then you fine-tune with the micrometer collar. It's the kind of tool that makes load development at the bench or right at the range genuinely easy.
Machined in the USA from stainless steel to tight tolerances, this seater is built to last and holds its settings trip after trip. It ships with the standard seating stem, which handles most bullet shapes well. If you run VLD or long-ogive bullets, Wilson offers a VLD stem separately that's worth picking up for those profiles.
An arbor press is the recommended way to run this die and gives you the smoothest, most repeatable results. That said, the die can also be operated with a soft-faced mallet if you don't have a press handy. Most precision reloaders pair it with a dedicated arbor or inline press for the best feel and consistency.
The micrometer head lets you adjust seating depth in .001 inch graduations with an easy-to-read scale. You can move back and forth between seating depths for different loads or rifles and return to a prior setting precisely. Major changes are made through the 3/8 inch to 24 TPI threads in the cap, then fine-tuned with the micrometer collar.
A chamber-type seater captures both the case and bullet and holds the case stationary while the stem pushes the bullet straight down into the neck. Because everything is aligned before the bullet moves, you get very low runout and strong concentricity. That's exactly why these dies are a longtime favorite among benchrest and precision shooters.
It ships with the standard seating stem, which works well for most common bullet shapes. If you load VLD or long-ogive bullets, L.E. Wilson offers a VLD stem separately that matches those profiles better and helps keep seating depth consistent. Picking one up is a smart move if those bullets are in your rotation.
| UPC | 815145022677 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | S6M-47L |
You must be logged in to post a review.
Reviews
There are no reviews yet.