Description
The Eylar 22" Carry-On Roller Hard Case brings together airline-friendly sizing and serious protection, and the black RAGAR foam setup is what sets it apart from the usual pluck-and-pull cases. Instead of ripping out foam cubes you can never put back, RAGAR uses interlocking, reconfigurable pieces that tessellate together so you can redesign the interior as many times as you want. Change out a lens, add a handheld, swap in a drone, and you just rearrange the foam to match. The shell is injection-molded from high-pressure polypropylene with a rubber gasket that seals when the latches snap shut, earning it an IP67 rating for full submersion protection down to about one meter.
What the RAGAR Foam Setup Gets You
Inside you get four layers total: two RAGAR reconfigurable and reusable pads, a solid bottom foam layer, and an egg-crate top layer that cushions the lid. The RAGAR pads come precut and ready to shape right out of the box, and you can pull and reposition pieces without any tools. Because every foam piece fits into any other position regardless of orientation, building a clean, snug cavity for oddly shaped gear is straightforward.
Traveling with the 22" Roller Case
External dimensions run 22" x 13.81" x 9" with an interior of 19.75" x 11" x 7.6", sized to slide into most overhead compartments. It rolls on low-profile wheels with a retractable pull handle, and ergonomic rubber-grip folding handles make lifting it into the bin easy. Two padlock-adaptable hasps let you lock it down, a pressure equalization valve lets the case vent and re-equalize as cabin pressure changes, and ridges on the top and bottom let you stack multiple cases for transport.
Built to shrug off drops, dust, and weather, the case handles temperature swings from roughly -20 degrees to 140 degrees Fahrenheit and is backed by a limited lifetime warranty. It weighs around 14 pounds empty, which is normal for a hard-sided case at this level of protection. Whether you're hauling camera bodies and lenses, a drone kit, pistols and accessories, or delicate tools, this one keeps everything locked in place and shielded.
Key Specifications
- Manufacturer: Eylar
- Manufacturer Part Number: SA00034-BLK-RG-XP
- UPC: 810161051885
- Color: Black
- External Dimensions: 22" x 13.81" x 9"
- Internal Dimensions: 19.75" x 11" x 7.6"
- Weight: Approx. 14 lbs
- Shell Material: High-pressure polypropylene
- Water Rating: IP67 waterproof, dustproof, shockproof (submersion to 1 meter)
- Foam Layers: 4 total: 2 RAGAR reconfigurable pads, 1 solid bottom layer, 1 egg-crate top layer
- RAGAR Foam Type: XP crosslinked polyethylene, reusable and reconfigurable
- Mobility: Integrated wheels with retractable pull handle
- Locking: Two padlock-adaptable hasps
- Extras: Pressure equalization valve, stackable ridges, folding rubber-grip handles
- Temperature Range: -20°F to 140°F
- Warranty: Limited Lifetime Warranty
What’s Included
- 22" Eylar carry-on roller hard case (black)
- 2 RAGAR reconfigurable XP crosslinked foam pads
- 1 solid bottom foam layer
- 1 egg-crate top foam layer
- Limited lifetime warranty
Frequently Asked Questions
How is the RAGAR foam different from regular pluck-and-pluck foam?
Standard pick-and-pluck foam is a one-time deal since you tear out cubes that can't go back in. The RAGAR system uses interlocking pieces that tessellate together, so you can remove and rearrange them as many times as you like without tools. When your gear changes, you just rebuild the cavity instead of buying new foam.
Will this Eylar 22" case fit in an airplane overhead bin?
It's sized for carry-on use with external dimensions of 22" x 13.81" x 9", which fits most standard overhead compartments. It also has two padlock-adaptable hasps if you want to lock it down. Overhead bin sizes do vary by aircraft, so it's worth checking your specific flight if space is tight.
Is the case truly waterproof?
Yes, it carries an IP67 rating. A rubber gasket lines the rim and forms a seal when the latches snap shut, giving you protection against dust and full submersion down to about one meter. There's also a pressure equalization valve that vents the case so it re-balances with changing air pressure.
What can I store in the 22" roller case besides cameras?
It's built for a wide range of gear. People use it for camera bodies and lenses, drones, handguns and accessories, optics, sensitive electronics, and tools. The reconfigurable RAGAR foam is what makes it flexible, since you can shape a snug fit for almost any kit you carry.





Reviews
There are no reviews yet.