Description
The Truglo Glo-Dot II Universal takes one of the oldest complaints about a plain-barrel shotgun, that dull little brass bead that disappears in low light, and fixes it with a bright red fiber-optic dot. It's built for plain-barrel 12 and 20 gauge guns and slips right over your factory front bead, so what you get is a glowing aiming point instead of a bead you have to hunt for. The fiber measures .078 inches, and the low-profile body keeps things clean so nothing blocks your view down the barrel.
What Makes the Glo-Dot II Worth Bolting On
The big draw here is speed. On flushing birds or clays, your eye finds a lit-up dot a lot quicker than it finds bare brass, and that shows up on cloudy days and in early-morning and late-evening light when a plain bead all but vanishes. The fiber-optic rod gathers ambient light and pushes it into a crisp red dot, giving you a real sight picture where you used to have next to nothing. It's earned an endorsement from Ducks Unlimited, which tells you where a lot of folks are putting it to work.
Getting the Glo-Dot II On Your Shotgun
Install is about as easy as it gets. There's no screwing, bolting, or trip to the gunsmith. You snap it in place over the existing front bead, slide it up snug so it seats correctly, and it holds through recoil once it's on. That simple mounting also means you can pull it off and move it to another plain-barrel gun if you swap shotguns for the season.
Where the Glo-Dot II Fits Best
This one is meant for smooth, round plain barrels, the kind you'll find on a lot of pump and defensive shotguns like Mossberg 500s, Remington 870s, older Winchester 1300s, and single-shots. Vent rib barrels are a different animal and call for a different mount. If your barrel is bare with just a bead up front, this is a low-cost, high-payoff upgrade for hunting, clays, or a home-defense scattergun.
Key Specifications
- Manufacturer: TRUGLO
- Manufacturer Part Number: TG92A
- UPC: 788130615560
- Model: Glo-Dot II Universal
- Gauge: 12 / 20 Gauge
- Sight Type: Fiber Optic Front Sight
- Fiber Color: Red
- Fiber Diameter: 0.078 in
- Barrel Fit: Plain (non-rib) barrel
- Mounting: Snap-on over existing front bead
- Profile: Low profile
- Construction: Polymer with fiber-optic rod
- Endorsement: Ducks Unlimited
What’s Included
- Truglo Glo-Dot II Universal red fiber-optic front sight (TG92A)
Frequently Asked Questions
Will the Glo-Dot II fit my shotgun?
It's built for plain, round barrel 12 and 20 gauge shotguns that have a standard front bead, which covers a lot of pumps and single-shots like the Mossberg 500, Remington 870, and older Winchester 1300. It snaps over the existing bead, so as long as you've got a smooth barrel surface at the muzzle with a bead up front, you're good. It is not made for vent rib barrels.
Do I need a gunsmith or any tools to install it?
Nope. The Glo-Dot II snaps in place over your factory front bead with no screwing or bolting, so there's no drilling and no trip to the gunsmith. You slide it up snug against the bead and it seats and holds through recoil.
How is this better than the brass bead already on my shotgun?
The fiber-optic rod pulls in surrounding light and glows as a bright red dot, so your eye finds it a lot faster than plain brass. That's a real difference on cloudy days, in early or late light, and when you're tracking a moving target where a standard bead tends to disappear.
Can I move the sight to a different shotgun later?
Yes. Because it snaps on rather than being permanently mounted, you can take it off one plain-barrel gun and move it to another. That makes it handy if you switch shotguns between seasons or want to try it on a couple of different guns.





Reviews
There are no reviews yet.