Description
Yankee Hill Machine took a smarter approach with the Victra-20 mounting system, and this Browning Invector Plus mount assembly is a good example of why. Instead of building the choke into the mount like most shotgun suppressor setups, YHM keeps the two jobs separate. This mount threads into your barrel's existing Invector Plus choke threads and does one thing: hold the suppressor securely to the gun. It applies zero constriction to your shot load. The patterning work happens up front, handled by the choke cone that sits in the end cap of the Victra-20 suppressor itself. That means one mount covers your shotgun, and swapping patterns is as simple as changing cones at the muzzle rather than buying a new combination mount for every constriction you want.
Built to Handle Life Behind a 20 Gauge
The mount is machined from 17-4 stainless steel and wears a Melonite finish, so it shrugs off the heat, fouling, and weather that come with duck blinds, turkey woods, and long clays sessions. Installed, it adds just 0.950 inches to your barrel length, keeping the whole setup compact before the can even goes on. YHM includes the V-20 jam nut (YHM-1250) with every mount, which locks the suppressor in the correct orientation. That matters with the Victra-20's offset bore design, since the nut keeps everything indexed right where it should be shot after shot.
Getting Your Invector Plus Barrel Suppressor Ready
Since these mounts are pattern specific, double check that your barrel uses Browning Invector Plus threads rather than the standard Invector pattern before ordering. Invector Plus is common on later Browning barrels with back-bored designs, while the original Invector shows up on Mossberg 500s, Winchesters, and older Brownings, and the two are not interchangeable. If your gun checks out, installation is straightforward: remove your choke tube, thread in the mount, spin on the suppressor, and snug the jam nut. From there your 20 gauge is ready for quieter mornings in the field.
Key Specifications
- Manufacturer: Yankee Hill Machine
- Manufacturer Part Number: YHM-1357A
- UPC: 841812103295
- Compatibility: YHM Victra-20 shotgun suppressor
- Thread Pattern: Browning Invector Plus choke threads
- Material: 17-4 stainless steel
- Finish: Melonite
- Length Added to Barrel: 0.950 in
- Choke Constriction: None (choke cone housed in suppressor end cap)
- Shipping Weight: 0.17 lbs
- Made In: USA
What’s Included
- Victra-20 mount assembly, Browning Invector Plus thread pattern
- YHM V-20 jam nut (YHM-1250)
Frequently Asked Questions
Does the Victra-20 mount assembly work as a choke?
No, and that's by design. The mount only secures the suppressor to your barrel and puts no constriction on the shot load. Pattern control comes from the choke cone installed in the front cap of the Victra-20 suppressor, and YHM offers Improved Cylinder, Modified, and Full cones so you can swap constrictions without changing the mount.
Will this fit standard Browning Invector chokes, or only Invector Plus?
This version is cut specifically for the Browning Invector Plus thread pattern, and it is not interchangeable with standard Invector threads. If your shotgun uses the original Invector pattern, like a Mossberg 500 or Winchester, YHM makes a separate mount for that. Check your barrel markings or choke tubes to confirm which pattern you have before buying.
What does the included jam nut do?
The Victra-20 has an offset bore design, so the suppressor needs to sit in a specific orientation on the gun. The included V-20 jam nut (YHM-1250) locks the suppressor in place once it's indexed correctly, keeping it from rotating under recoil. It comes standard with every Victra mount.
How much length does the Victra-20 mount add to my barrel?
Installed, the mount adds 0.950 inches to your barrel length. It's machined from 17-4 stainless steel with a Melonite finish, so it holds up well to heat and fouling. Keep in mind the suppressor itself adds more length depending on which of its modular configurations you run.





Reviews
There are no reviews yet.