0
0

YHM Phantom .30 Cal Q.D. Mount M14/M1A Flash Hider 19/32-32

UPC: 841812100799

$153.75

3 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Running a suppressor on an M14 or M1A has always been a bit of a puzzle, since the factory flash hider and sight assembly take up all the real estate at the muzzle. Yankee Hill Machine solved it the smart way with this dedicated Q.D. mount. Pull off the stock flash hider and sight assembly, transfer your original sight post over to the YHM mount, and thread the new assembly onto the barrel. You keep your irons, you keep your sight picture, and now you have a quick-detach point for a can.

Why the YHM M14 Q.D. Mount Earns Its Spot

This piece is built around YHM's proven Phantom flash hider design, so even when you are shooting without the suppressor attached, you still get the flash suppression the Phantom line has been known for over the years. When it is time to run quiet, the mount pairs with YHM's Resonator and Phantom .30 cal Q.D. sound suppressors, and it also works with 1 3/8"-24 HUB capable cans using YHM's Phantom Q.D. adapter. That covers a wide range of modern suppressors, which makes this mount a solid long-term investment rather than a one-can accessory. One thing worth knowing before you order: this mount will not accept YHM's 5.56 Q.D. suppressors, and the sight base is sized for standard-length barrels, so it will not fit rifles with 18.5 inch or shorter tubes.

Installing the YHM 4302 M14 Flash Hider Mount

The 19/32-32 thread pitch matches the standard M14/M1A muzzle, so installation is straightforward with basic armorer tools. YHM recommends torquing the device between 20 and 30 ft-lbs, and skip the crush or peel washers entirely, they have no place on a Q.D. mount that needs to stay concentric. The whole assembly comes in at about 5.5 ounces with a black finish that blends right in with a parkerized service rifle. If you have been wanting to bring your M1A into the suppressed world without butchering the classic look, this is the way to do it.

Key Specifications

  • Manufacturer: Yankee Hill Machine
  • Manufacturer Part Number: YHM-4302-M14-SA
  • UPC: 841812100799
  • Caliber: .30 Cal / 7.62mm
  • Thread Pitch: 19/32-32 (.595")
  • Platform Fit: M14 / M1A rifles
  • Length: 3 inches
  • Weight: 5.536 oz
  • Finish/Color: Black
  • Suppressor Compatibility: YHM Resonator & Phantom .30 Cal Q.D. suppressors
  • Recommended Torque: 20-30 ft-lbs
  • Barrel Restriction: Sight base does not fit barrels 18.5" or shorter

What’s Included

  • YHM Phantom .30 Cal Q.D. mount flash hider with M14 sight base assembly

Frequently Asked Questions

Do I lose my front sight when installing the YHM M14 Q.D. mount?

No, and that is the whole point of this design. You remove the factory flash hider and sight assembly, then reinstall your original sight post onto the YHM mount's sight base. Your sight picture stays intact while you gain a quick-detach suppressor mount.

Which suppressors work with the YHM 4302 M14 flash hider?

It is designed for Yankee Hill Machine's Resonator and Phantom .30 cal Q.D. sound suppressors. It also works with 1 3/8"-24 HUB capable suppressors when paired with YHM's Phantom Q.D. adapter. It will not accept YHM's 5.56 Q.D. suppressors, so keep that in mind if you run a smaller-bore can.

Will this fit my SOCOM or other short-barreled M1A?

The flash hider threads are standard 19/32-32, but the sight base will not fit rifles with 18.5 inch or shorter barrels. Standard-length M14 and M1A rifles are the intended fit. If you have a shorter variant, double check your barrel length before ordering.

What torque spec should I use when installing this mount?

YHM recommends torquing the device to between 20 and 30 ft-lbs. Do not use crush or peel washers, as they can throw off alignment and a Q.D. suppressor mount needs to sit true to the bore. Proper timing and torque keep everything concentric and safe.

Additional information

UPC

841812100799

Manufacturer

Manufacturer Part Number

YHM-4302-M14-SA

Color

Black

Length

8.0500

Shipping Weight

0.418

Reviews

There are no reviews yet.

Be the first to review “YHM Phantom .30 Cal Q.D. Mount M14/M1A Flash Hider 19/32-32”