$16.75
6 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Exposed barrel threads have a way of finding trouble. One bump against a bench, a little grit in the crown of the threads, and suddenly your suppressor or muzzle device does not want to spin on straight. The Yankee Hill Machine YHM-3410-B is the simple fix. It threads onto any standard 1/2-28 muzzle and covers those threads until you are ready to use them, which is exactly the kind of cheap insurance every threaded barrel deserves.
What sets this particular YHM thread protector apart is the .920 inch outside diameter. That measurement matches the classic bull barrel profile you will find on heavy-barreled 10/22 builds, target-profile AR uppers, and precision rimfire rifles. Instead of a skinny cap sitting on a fat barrel looking like an afterthought, this one sits flush and clean, like the barrel was finished that way from the factory. The 1/2-28 thread pitch covers .22 LR and .223/5.56 barrels, which is the most common threading you will run into on rimfire and AR-pattern rifles.
Yankee Hill machines these from steel rather than aluminum, so cross-threading fears and dinged-up edges are a lot less of a concern. The matte black plated finish resists wear and matches most barrel finishes without drawing attention. Knurling around the body gives your fingers something to grab, so it comes off by hand when it is time to mount a can and snugs back on just as easily.
If you run a suppressor, your threads spend plenty of time uncovered between range trips. A protector like this keeps carbon, rust, and impact damage away from the one part of your barrel you really cannot afford to booger up. It is a small part, but it is the kind of small part that saves you a trip to the gunsmith. Yankee Hill has been machining suppressors and muzzle hardware in Massachusetts for decades, and that shows even in a piece this simple.
If your barrel is threaded 1/2-28, yes, it will thread right on. Just keep the diameter in mind. This version has a .920 inch outside diameter made to match bull barrel profiles, so it looks best on heavy target barrels. On a slim pencil-profile barrel it will still work, but it will stick out wider than the barrel itself.
No. While some 9mm pistol barrels use a 1/2-28 thread, this protector is sized for .22 and .223/5.56 bore diameters. YHM makes other thread protectors better suited to pistol applications, so match the protector to your barrel's caliber and thread pitch.
Not at all. The body is knurled so you can spin it on and off by hand. Snug it up finger tight and it will stay put for normal range use. A drop of thread locker is an option if you plan to leave it on long term, but most folks just hand tighten it.
Muzzle threads are precisely cut, and even minor dings or carbon buildup can make a suppressor or muzzle device seat crooked or bind up. A steel protector like this one shields the threads from impacts, dirt, and corrosion whenever a device is not mounted. It is a few bucks of protection for a barrel that costs a whole lot more to rethread.
| UPC | 816701013870 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | YHM-3410-B |
| Color | Black |
| Model | |
| Product Type | Thread Protector |
You must be logged in to post a review.
Reviews
There are no reviews yet.