$17.90
9 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Grip angle is one of those little details that makes a big difference once you notice it, and most AR grips lock you into a single answer. The XTech Tactical ATG takes a different approach. It pivots between three proven angles, 17, 25, and 33 degrees, so you can fine-tune how the rifle sits in your hand based on your stock length, your stance, and how you shoot. Run a fully collapsed stock and want your wrist upright? Set it steep. Prefer that laid-back A2 feel? Drop it flatter. It is one grip that quietly covers what usually takes three.
Adjustment is refreshingly simple. You do not need to pull the mounting screw all the way out to change angles. Loosen it just enough to disengage the interlocking teeth, line the grip up with one of the three scribe marks on the backstrap, then snug it back down. The design uses tapered interlocking teeth, a stainless steel bolt, and a locking washer so the two-piece assembly behaves like a solid, single-piece grip once tightened. Reviewers who cranked the screw loose and tight over a dozen times reported it stayed put without wandering.
This is the heavy-texture version, which brings a more aggressive surface, standing ribs across the back, and subtle finger grooves for a positive hold that does not chew up your palm. It is molded from tough, impact-resistant polymer and tips the scales around 77 grams, right in the sweet spot between a stock A2 and heavier aftermarket grips. Designed and manufactured in Arizona, the ATG fits AR-15 and M4 Mil-Spec receivers, and since so many rifles, PCCs, and chassis run the AR-pattern grip, it drops onto a lot more than just your standard carbine.
Installation is no different than swapping any AR grip. One screw, one hex key, and you are ready to fine-tune the feel. If you have never played with grip angle before, this is a low-cost way to find out what fits you best.
You do not have to remove the mounting screw completely. Just loosen it enough to disengage the interlocking teeth, line the grip up with one of the three scribe marks on the backstrap, and tighten it back down. Set to 17, 25, or 33 degrees in under a minute with the included hex key.
No. The two-piece design uses tapered interlocking teeth, a stainless steel bolt, and a locking washer that lock together so it acts like a single-piece grip at any of the three angles. Reviewers who repeatedly loosened and retightened it during testing reported it held firm without shifting.
It is built for AR-15 and M4 Mil-Spec receivers, but plenty of firearms use the AR-pattern grip. That opens it up to many semi-auto rifles, PCCs, some shotguns, and bolt-action chassis that accept a standard AR grip. Installation is the same one-screw process as any AR grip.
The heavy texture version has a more aggressive surface, standing ribs across the back of the grip, and a bolder styling than the original ATG. It gives you a firmer, more positive hold in wet or fast-moving conditions while keeping the same three-angle adjustability and durable polymer build.
| UPC | 856822007198 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | XTT117-BLK ATG |
| Color | Black |
| Length | 9.5000 |
You must be logged in to post a review.
Reviews
There are no reviews yet.