Description
Small-frame Taurus revolvers are great carry guns, but that tiny factory front sight is tough to find in a hurry. This XS Standard Dot swaps it out for something you can pick up fast: a tritium-powered front with a photoluminescent orange Glow Dot that soaks up ambient light and keeps glowing when the sun goes down. The convex face of the dot grabs more light than a flat sight, so it charges brighter and stays visible longer in dim conditions.
What the XS Standard Dot Does for Your Taurus
The whole idea here is dual illumination. In daylight the bold orange dot jumps out against a target, and reviewers consistently note it's a night-and-day improvement over the stock blade. When the light drops, the tritium lamp takes over so you always have a reference point. It's built for defensive use and everyday carry, and folks with aging eyes tend to appreciate the larger, higher-contrast profile that makes the front sight easier to see. This isn't a bullseye precision sight, but for the 5 to 10 yard defensive work these revolvers are made for, it lets you shoot quick, respectable groups without fighting your sight picture.
Built Tough and Easy to Install
XS machines these from solid steel bar stock at their shop in Fort Worth, Texas, and does the tritium insertion in house, so the build quality holds up to recoil and daily handling. The sight is pre-drilled for the factory retention pin, which makes it a genuine drop-in for any Taurus 856 or 605 with a pinned front blade.
Installing the Standard Dot at Home
This is a DIY job most people knock out in well under ten minutes. You'll want a properly sized roll pin punch and a small hammer to drift the old pin out, pull the factory sight, drop the XS in, and tap the pin back through. Heads up: some 1/16-inch punches run a hair oversized and can stick, so having a proper pin punch on hand makes the whole thing smooth. A dab of thread locker on reassembly is optional but not a bad idea. XS also provides written installation instructions if you'd rather follow along step by step.
Key Specifications
- Manufacturer: XS Sights
- Manufacturer Part Number: TS-0003N-4N
- UPC: 647533002738
- Fits: Taurus 856 and 605 with factory pinned front sight
- Sight Type: Front night sight, Standard Dot
- Illumination: Tritium lamp with photoluminescent orange Glow Dot
- Dot Color: Orange
- Construction: CNC-machined steel
- Style: Fixed
- Country of Origin: United States
- Installation: Roll pin, DIY drop-in
What’s Included
- XS Sights Standard Dot tritium front sight
- Written installation instructions
Frequently Asked Questions
Will this XS Standard Dot fit both the Taurus 856 and 605?
Yes. It's designed for Taurus 856 and 605 revolvers that use a factory pinned-in front sight. Owners have also reported it fitting other pinned-front Taurus models like the 942 and 605-based .357 variants, since they share the same front sight setup.
How hard is it to install the XS front sight myself?
It's a straightforward at-home job that most people finish in under ten minutes. You drift out the retention roll pin, pull the factory sight, drop in the XS, and tap the pin back through. All you need is a properly sized roll pin punch and a small hammer, and the sight comes pre-drilled for the pin.
What tools do I need for the roll pin?
A roll pin punch and a small hammer will get it done. Keep in mind that some 1/16-inch punches run slightly oversized and can bind in the hole, so a quality pin punch sized to slide through cleanly makes the swap easier. Hang onto the original pin, since you'll reuse it to secure the new sight.
Is the tritium and Glow Dot bright enough for carry use?
It is. The tritium lamp glows on its own in the dark, while the orange Glow Dot charges off ambient light for extra brightness in low light. In daylight the bold dot is easy to pick up fast, which is exactly what you want on a defensive revolver at close range.





Reviews
There are no reviews yet.