Description
The X-Vision Flex 100 is a dedicated thermal laser rangefinder module built to pair with the X-Vision Optics Flex 2 Thermal Reflex Sight. Rather than being a standalone unit, it mounts to your sight and pushes accurate distance readings right onto the display, so you can range a target and hold for the shot without ever pulling your eye away. It runs a 905nm laser with ranging out to 1,000 yards, which is plenty of reach for predator work and most night hunting situations.
What the Flex 100 Rangefinder Brings to Your Setup
The Flex 2 on its own uses a built-in stadiametric rangefinder, which works but takes some guesswork. Adding the Flex 100 laser module takes the estimating out of the equation and gives you a true laser reading on the glass. Power comes from the host device, so there's no separate battery to babysit, and it's engineered to run a few hours of continuous use before you top off the sight itself.
Built for Real Field Abuse
The housing is lightweight aluminum, which keeps the whole package trim at about a tenth of a pound and roughly 2.25 by 1 by 1 inches. It carries an IP67 rating against water and dust, and it's rated to handle shock loads up to 800G, so recoil and the occasional bump in the truck bed or on the stand aren't going to rattle it. The module attaches quickly with its included scope ring and mounting bracket, keeping the install simple and secure.
A Note on Compatibility
This is the key detail to get right before you buy. The Flex 100 is made exclusively for the X-Vision Optics Flex 2, and the Flex 2 sight is sold separately. If you already run a Flex 2 or you're building one out, this is the upgrade that turns a very good thermal reflex sight into a true aim-range-and-fire system in the dark.
Key Specifications
- Manufacturer: X-Vision Optics
- Manufacturer Part Number: TRR100
- UPC: 850020714445
- Laser Wavelength: 905 nm
- Laser Ranging Distance: Up to 1,000 yards
- Compatibility: X-Vision Optics Flex 2 Thermal Reflex Sight
- Power Supply: From host device
- Battery Life: Approx. 3 hours
- Mount Type: Scope rings
- IP Rating: IP67 water and dust resistant
- Shock Rating: Up to 800G
- Housing Material: Aluminum
- Weight: 0.11 lb
- Dimensions: 2.25" x 1" x 1"
What’s Included
- Flex 100 thermal laser rangefinder module
- Scope ring
- Mounting bracket
- Owner's manual
Frequently Asked Questions
Does the Flex 100 rangefinder work as a standalone unit?
No, it's a module designed to mount onto the X-Vision Optics Flex 2 Thermal Reflex Sight. Once attached, it sends laser distance readings directly to the Flex 2's display. You'll need the Flex 2 sight to use it, and that sight is sold separately.
How far can the Flex 100 range a target?
The Flex 100 uses a 905nm laser and ranges targets out to 1,000 yards. That's a solid reach for predator hunting and most low-light shooting scenarios. The actual return can vary with target size and reflectivity, as with any laser rangefinder.
Will the Flex 100 hold up to recoil and rough weather?
Yes. The aluminum housing carries an IP67 rating for water and dust resistance and is rated to handle shock loads up to 800G. It's built to stay reliable through recoil and the usual bumps that come with hunting in the field.
Does the Flex 100 need its own battery?
No separate battery is required. The module draws power from the host Flex 2 sight, so there's one less thing to charge or swap out. Plan your runtime around the sight's battery and the rangefinder's roughly three hours of use.



Reviews
There are no reviews yet.