$148.50
11 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Building an AR-15 or refreshing one you already own is where personality comes into play, and the WMD Guns Accent Build Kit in 5.56 Red hands you a coordinated set of red-coated exterior parts so you can add flair without chasing down pieces one at a time. Whether you want a full-on cherry red control setup or just a few pops of color to contrast a black or FDE rifle, this kit covers the parts people see and touch most.
The finish is what sets WMD apart. Their parts are coated in a proprietary NiB-X nickel boron base, then layered with a ceramic color coat that runs harder and more resilient than chrome. That nickel boron underneath is not just for looks either. It delivers slick lubricity and corrosion resistance, so wiping off carbon is easy and the parts hold up over the long haul. Builders who have run WMD components tend to praise the finish quality and the value you get for the money.
This is a fairly complete small-parts group for the upper and lower receiver. You get the ejection port cover door, forward assist, castle nut, receiver end plate, bolt catch, mag lever, mag button, safety selector, pivot pin, takedown pin, trigger guard, and buffer retainer, plus all the necessary pins and springs for the lower controls. One thing worth knowing up front: this kit does not include any trigger components, so plan to source your fire control group separately.
Installation is well within reach for most hands-on builders. With a punch set, a castle nut wrench, and a little patience with the detent springs, you can knock this out at the bench. It also doubles nicely as a spare parts stash for the small pieces that tend to go missing during a build, so nothing about this kit goes to waste.
No, this kit does not include any trigger or fire control components. It covers the external small parts like the safety selector, pins, controls, and hardware, so you will need to source a trigger group separately. Think of it as the color and hardware layer of your build rather than the guts of the fire control.
The parts wear a ceramic color coat layered over WMD's proprietary NiB-X nickel boron base. That combination gives you the vivid red look on the outside and a hard, slick, corrosion-resistant surface underneath. It is tougher than chrome and makes carbon cleanup easy.
Yes, the kit is built to mil-spec dimensions for the AR-15 platform and drops into standard receivers. It works for both upper and lower small parts. As with any build, matching your receiver spec and having the right punches and wrenches on hand makes the job smooth.
Most hands-on builders can handle it with basic tools like a punch set and a castle nut wrench. The trickiest spots are the detent springs and roll pins, which just take patience and a steady hand. There are plenty of build guides out there if it is your first time.
| UPC | 854839008214 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | ACCKIT-RED |
| Color | RED |
| Model | |
| Product Type | Kit |
You must be logged in to post a review.
Reviews
There are no reviews yet.