0
0

EGW Winchester XPR Long Action 1-Piece Picatinny Rail 20 MOA

UPC: 841370114016

$36.00

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Getting a scope mounted square and solid on your Winchester XPR long action starts with a good base, and this EGW one-piece Picatinny rail is about as straightforward as it gets. It's machined from domestic 6061-T6 extruded aluminum, finished in matte black anodizing, and built specifically for the XPR long action receiver. The full-length MIL-STD 1913 cross slots give you room to slide your rings exactly where you want them for proper eye relief, and the center channel is cut out to shave weight without giving up strength. Tipping the scale at right around 2 ounces, it adds a sturdy foundation without piling on bulk.

What 20 MOA Does on Your XPR Rail

The built-in 20 MOA of forward cant is the part worth understanding. That angle tilts your scope slightly downward relative to the bore, which banks extra elevation adjustment into your turret so you don't run out of dial when reaching out to longer distances. EGW suggests the 20 MOA option for shooting roughly 500 to 1,000 yards, and recommends setting your zero at 200 yards when running this rail. If most of your shooting lives inside 500 yards, a flat 0 MOA base is the better call, but for anyone chasing distance with their XPR, this is the one you want.

Fit and Install on the Winchester XPR Long Action

This base is cut for the XPR long action and will not fit a Model 70 or the short action XPR, so it pays to confirm your rifle before ordering. Everything you need comes in the box, including the mounting screws and the Torx bit, and EGW recommends torquing to 20 inch-pounds with a drop of blue thread locker for a mount that stays put under recoil. The bevels on both sides make it ambidextrous, and in many cases the low profile still leaves room for factory iron sights. Pair it with a quality set of Picatinny or Weaver-style rings and you've got a clean, dependable setup ready for the range or the field.

Key Specifications

  • Manufacturer: EGW (Evolution Gun Works)
  • Manufacturer Part Number: 42602
  • UPC: 841370114016
  • Fits: Winchester XPR Long Action
  • Rail Type: One-Piece Picatinny (MIL-STD 1913)
  • Cant / Elevation: 20 MOA
  • Material: Domestic 6061-T6 Extruded Aluminum
  • Finish: Matte Black Anodizing
  • Center Spread: 3.862 in
  • Overall Length: 7.064 in
  • Height: 0.4 in (top of receiver to top of rail)
  • Weight: 2 oz
  • Screw Thread: 8-40
  • Ambidextrous: Yes
  • Quick Disconnect Ring Compatible: No
  • Made In: USA

What’s Included

  • EGW 20 MOA one-piece Picatinny rail
  • Mounting screws (8-40)
  • T-10 Torx bit
  • Installation instructions

Frequently Asked Questions

Will this EGW Picatinny rail fit my Winchester XPR?

It fits the Winchester XPR long action receiver only. It is not made for the XPR short action or for any Model 70, so check which action your rifle has before ordering. EGW also suggests measuring your receiver's hole spacing against the published dimensions to confirm the match.

What does the 20 MOA do and when should I pick it over a 0 MOA base?

The 20 MOA cant tilts the rail forward, adding elevation to your scope's adjustment range so you can dial for longer shots without topping out the turret. EGW recommends the 20 MOA for shooting in the 500 to 1,000 yard range. If you mostly stay inside 500 yards, the 0 MOA version is the better fit.

Does the rail come with everything I need to install it?

Yes, it ships with the mounting screws and a T-10 Torx bit along with instructions. EGW recommends torquing the screws to 20 inch-pounds and adding a drop of blue thread locker to keep things tight under recoil. You will still need a set of Picatinny or Weaver-style scope rings, which are sold separately.

Where should I zero my rifle when running the 20 MOA rail?

EGW recommends setting your zero at 200 yards when using the 20 MOA mount. That lets the forward cant do its job and leaves you plenty of up travel in the turret for reaching out to distance.

Additional information

UPC

841370114016

Manufacturer

Manufacturer Part Number

42602

Action

Color

Black

Length

9.1500

Model

Style

Picatinny Rail

Reviews

There are no reviews yet.

Be the first to review “EGW Winchester XPR Long Action 1-Piece Picatinny Rail 20 MOA”