0
0

Winchester Signature Invector-Plus 12 Gauge Improved Modified Extended Choke Tube

UPC: 048702178733

$45.99

4 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Improved Modified tube sits between Modified and Full, giving you a tight pattern that keeps pellets grouped out where a lot of chokes start to fall apart. With a .025 constriction and a .715 bore diameter, it's built for the longer shots, think pass-shooting waterfowl, late-season upland birds holding tight, or trap and sporting stations where the clay is way out there. Winchester rates it for use out to around 50 yards, so this is your go-to when the extra reach counts.

Where the Signature Invector-Plus Design Earns Its Keep

The extended length is the whole idea behind the Signature Series. That extra tube reaches about 3/4 of an inch past the muzzle, and combined with the refined internal tapers, it smooths out the shot column for more uniform densities and fewer fliers. The Invector-Plus system also works hand-in-hand with back-boring on Winchester barrels, which helps deliver those dense, even patterns without beating up your shot. The extended body makes it easy to spot and simple to swap by hand at the range or in the blind.

Built From 17-4 Stainless Steel

This tube is machined from 17-4 stainless steel, which is the good stuff when it comes to holding up against steel shot and shrugging off corrosion. It's cleared for steel, lead, and non-toxic loads, so you don't have to second-guess what you're feeding it. That durability matters if you're a waterfowler running heavy steel or someone who logs a lot of rounds on clays.

Fitment You Should Know

This is a 12 gauge Invector-Plus tube, which means it drops into current and past Winchester shotguns including the Model 101, Supreme, Select, SX2, SX3, SX4, Super X Pump, and SXP. Just double-check that your barrel is threaded for Invector-Plus and not standard Invector, since the two aren't interchangeable. Get that right and you've got a factory-grade choke that patterns clean and lasts.

Key Specifications

  • Manufacturer: Winchester
  • Manufacturer Part Number: 6130733
  • UPC: 048702178733
  • Gauge: 12 Gauge
  • Choke System: Invector-Plus
  • Constriction: Improved Modified
  • Degree of Constriction: .025
  • Bore Diameter: 0.715 in
  • Product Type: Extended
  • Material: 17-4 Stainless Steel
  • Finish: Stainless
  • Approved Shot Types: Steel, Lead, Non-Tox
  • Recommended Distance: 50 yards
  • Weight: 3.2 oz
  • Chokes Included: One

What’s Included

  • (1) Winchester Signature Invector-Plus Improved Modified extended choke tube

Frequently Asked Questions

What shotguns does this Invector-Plus Improved Modified choke fit?

It's made for 12 gauge Winchester shotguns threaded for the Invector-Plus system, including the Model 101, Supreme, Select, SX2, SX3, SX4, Super X Pump, and SXP. Before ordering, confirm your barrel is Invector-Plus and not standard Invector, because the two thread patterns don't swap. When in doubt, the choke that came with your gun is usually marked.

Can I run steel shot through the Signature Invector-Plus Improved Modified tube?

Yes. It's machined from 17-4 stainless steel and approved for steel, lead, and non-toxic loads. The Invector-Plus design was built with steel shot in mind, so it holds up well to heavier waterfowl loads without excessive wear.

What's the constriction and effective range on this choke?

The Improved Modified constriction measures .025 with a bore diameter of .715 inches, putting it a notch tighter than Modified but not quite Full. Winchester recommends it for shots out to roughly 50 yards. That makes it a strong pick for pass-shooting, longer clay stations, and birds holding at distance.

Is the Improved Modified choke ported?

No, this is a non-ported extended tube. The extended body still makes it easy to grip and hand-tighten, and the longer taper inside helps produce uniform patterns with fewer fliers. If you specifically want porting for reduced muzzle rise, you'd want to look at a different tube.

Additional information

UPC

048702178733

Manufacturer

Manufacturer Part Number

6130733

Caliber/Gauge

12 Gauge

Chokes Included

One Choke

Product Type

Extended

Reviews

There are no reviews yet.

Be the first to review “Winchester Signature Invector-Plus 12 Gauge Improved Modified Extended Choke Tube”