$43.99
8 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
If you're keeping an M1 Carbine fed without burning through factory ammo, quality brass is where it all starts. These Winchester .30 Carbine cases come to you unprimed and ready to prep, which means you pick the primer, powder charge, and bullet that suits your rifle. Winchester draws these cases to precise tolerances so they feed smoothly and chamber positively, and the brass itself is annealed during manufacturing to the right hardness so it grips the bullet firmly while staying flexible when the round fires.
The .30 Carbine headspaces on the case mouth, so case length really matters with this cartridge. Starting with fresh, uniform Winchester brass takes a lot of guesswork out of that first load. The cases carry the Winchester headstamp, so you always know what you're working with, and the consistent wall concentricity helps the bullet seat straight in both the case and the chamber. For a round that runs at rifle pressures in a small case, that kind of starting consistency pays off.
This is slightly tapered, straight-wall brass, so it sizes a little differently than a true straight wall like .45 ACP. Plan on lubricating each case before running it through your sizing die, and keep a case trimmer handy since trimming to length is part of getting this cartridge to chamber and fire correctly. Most handloaders pair these with small rifle primers and a ball powder like H110 or W296 behind a 110-grain round nose bullet, which is the classic recipe this cartridge was built around.
Whether you're loading for weekend plinking, a little small-game work, or just stretching your component supply, this Winchester brass gives you a dependable foundation to build on. It's not loaded ammunition, just quality cases ready for your bench.
Most handloaders use small rifle primers with this cartridge, not small pistol. The .30 Carbine runs at rifle pressures, and the M1 Carbine uses a floating firing pin, so the harder cup of a small rifle primer is the safer, more common choice. Many reloaders go with a standard or magnum small rifle primer to reliably light off ball powders like H110 or W296.
Yes, keeping an eye on case length is important with this round. The .30 Carbine headspaces on the case mouth, so a case that is too long or too short can cause chambering or ignition problems. Keep a case trimmer on hand and check length as part of your prep, especially after resizing and multiple firings.
This is unprimed brass only, not loaded ammunition. You get 100 empty Winchester .30 Carbine cases ready to prep with your own primer, powder, and bullet. It's meant for reloading, so you'll need the rest of your components and dies to build finished rounds.
Yes, lube is a must with .30 Carbine brass. These cases have a slightly tapered straight wall, so even if you're running carbide dies, a good case lube keeps things moving smoothly and helps prevent a stuck case. A thin, even coat on each case before sizing makes the whole process easier on your press and your brass.
| UPC | 020892632820 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | WSC30CU |
| Caliber/Gauge | .30 Carbine |
| Product Type | Rifle |
| Quantity | 100 Per Bag |
| Style | Large |
You must be logged in to post a review.
Reviews
There are no reviews yet.