$1,139.95
3 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Titanium suppressors tend to make you pick between light weight and toughness. The Wilson Combat Quell Ti sidesteps that trade-off by building the whole can from 6Al-4V titanium and sealing it up with circumferential welds, so you get a suppressor that shrugs off hard use without weighing down the front of your rifle. This version wears a 9mm bore and 5/8×24 threads, which means it covers big-bore rounds like .338 Federal and .358 Winchester along with everything smaller, making it a genuinely flexible one-can solution for a whole safe full of rifles.
Every Quell is cut in-house on 5-axis CNC equipment, and that precision shows up where it matters. Point-of-impact shift stays minimal when you mount or remove the can, so your zero doesn't wander every time the suppressor comes on and off. The fixed K-type baffle stack handles the heat that comes with supersonic rifle fire and high round counts, and the tight machining tolerances keep the risk of a baffle strike about as low as it gets. A heat-resistant Armor Tuff finish in black rounds out the package and holds up to weather, sweat, and field abuse.
The Quell Ti attaches through Wilson Combat's K-Mount interface, and setup could not be much simpler. There's no shimming or indexing involved, and the only tool you need is a common 7/8 inch 12-point socket. Once the mount is torqued down, the suppressor spins on and off quickly and returns to the same position every time. Bonus points: with the can removed, the black nitride K-Mount doubles as a flash reducer roughly on par with a classic A1-style hider, so your rifle stays useful either way.
Because the Quell is a fully sealed design, upkeep is refreshingly simple. There's no disassembly and no baffle scrubbing, just an occasional soak in bore solvent followed by a blast of compressed air. Stick with jacketed projectiles and this can will quietly do its job for a very long time.
This version has a 9mm bore and is rated for cartridges like .338 Federal, 9mm, and .358 Winchester, which also means it covers smaller rifle rounds such as .308, 6.5 Creedmoor, and 300 Blackout when mounted with the appropriate K-Mount. That larger bore makes it a versatile multi-gun option, though a dedicated smaller-bore can will always squeeze out a bit more suppression on smaller cartridges.
The K-Mount threads onto your 5/8×24 muzzle without any shimming or indexing, and the only tool required is a standard 7/8 inch 12-point socket torqued to no more than 20 foot-pounds. Once mounted, the suppressor attaches and detaches quickly and returns to zero consistently. With the can off, the black nitride mount also works as a flash reducer.
The Quell is a fully sealed suppressor, so it does not come apart for cleaning and does not need regular scrubbing. An occasional soak in bore solvent or carbon cleaner followed by compressed air is all it takes. Because of the sealed design, Wilson Combat recommends sticking with jacketed bullets rather than bare lead projectiles.
The 9mm designation refers to the bore diameter, not the intended host. This is a rifle-format suppressor built for threaded rifle barrels, and it does not use a booster assembly like dedicated handgun cans do. It's aimed at bolt guns, carbines, and precision rifles rather than tilting-barrel semi-auto pistols.
| UPC | 810129405248 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | SPQUELLH9BLK24 |
| ATF Type | Silencer |
| Caliber/Gauge | 358/9mm |
| Color | Black |
| Length | 8.2 |
| Model | |
| Package Height | 2.2 |
| Package Width | 3.5 |
| Product Type | NFA – Silencer |
| Shipping Weight | 1.0 |
| Thread Pattern | 5/8"x24 |
| Style | Quick Detach |
You must be logged in to post a review.
Reviews
There are no reviews yet.