Description
Neck tension is one of those little details that separates good ammo from great ammo, and this is the part that lets you control it. The L.E. Wilson Steel Neck Sizer Die Bushing in .331 is a drop-in insert that sizes your case necks to a precise finished diameter so your brass grips the bullet the same way every single time. It's machined from hardened steel, which means it holds its dimension through a lot of sizing cycles without wandering off size.
How the .331 Bushing Fits Into Your Setup
This bushing is made to interchange freely across Wilson bushing-type neck sizing dies and bushing-style full-length sizing dies, and it also works in Redding, RCBS, and Hornady bushing dies. Inside a Wilson die, the bushing is meant to float a little rather than lock down tight, so it can self-center on the neck as the case comes up. That floating fit is a big part of why these dies produce such straight, concentric necks.
Picking the Right Size and Getting the Most From It
Sizing selection is simple. Measure the outside diameter of a loaded round at the neck, then subtract .002 to .003 to land on your bushing. That small reduction accounts for brass spring-back and leaves you right around .001 to .002 of bullet grip, which is the sweet spot a lot of bench rest and precision loaders chase. Keep in mind that bushings are reamed with a slight taper, so the marked size sits at the middle. If your brass has work-hardened and springs back more than usual, you can flip the bushing over with the numbers facing down to squeeze a touch tighter without jumping to the next smaller size.
Built to Earn a Spot in Your Bushing Drawer
Most serious handloaders don't stop at one. Because each bushing is sold on its own, you can build a set covering different brass lots, bullets, and loads so you're always ready to tune. L.E. Wilson has been turning out precision reloading tools for decades, and this made-in-the-USA bushing carries that same reputation for repeatable, no-drama performance on the bench.
Key Specifications
- Manufacturer: L.E. Wilson
- Manufacturer Part Number: B-331
- UPC: 815145025210
- Bushing Diameter: .331 inch
- Material: Hardened Steel
- Tool Type: Neck Sizing Bushing
- Compatibility: Wilson neck sizing and bushing-type full-length dies; also fits Redding, RCBS, Hornady bushing dies
- Internal Taper: .003 inch taper, marked size measured at middle
- Sizing Increments: .001 inch
- Country of Origin: United States
- Shipping Weight: 0.1 lb
What’s Included
- (1) L.E. Wilson Steel Neck Sizer Die Bushing .331 (B-331)
Frequently Asked Questions
How do I know if the .331 bushing is the right size for my loads?
Measure the outside diameter of a loaded round at the neck where the bullet sits, then subtract .002 to .003. If that math lands you at .331, this is your bushing. That small reduction accounts for brass spring-back and leaves you with roughly .001 to .002 of neck tension on the bullet.
Will this bushing fit my Wilson die, or only one specific model?
It interchanges freely across Wilson bushing-type neck sizing dies and bushing-style full-length sizing dies. These bushings also fit Redding, RCBS, and Hornady bushing dies, so most precision reloading setups will take it without any issue.
Why does the L.E. Wilson bushing have a taper, and does orientation matter?
Each bushing is reamed with a slight taper, and the marked size refers to the middle where the case neck actually sizes. Running it with the numbers up is the standard orientation. If your brass has hardened and springs back more than usual, flipping it with the markings facing down gets you a slightly tighter grip without stepping down to the next smaller bushing.
Should the bushing be locked down tight inside the die?
No, it's designed to float a little inside the die rather than being clamped in place. That slight free movement lets the bushing self-center on the case neck as it sizes, which helps produce straighter, more concentric necks. Many reloaders back the cap off a fraction of a turn so they can hear the bushing move slightly.




Reviews
There are no reviews yet.