$38.99
49 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Buffer weight is one of those things that gets overlooked until your rifle starts spitting brass at your face or short-stroking on you at the range. White Label Armory built this carbine buffer to fix exactly that kind of headache. It's a heavier H1 weight buffer, meaning it carries a mix of tungsten and steel internal weights instead of the standard three steel weights you'd find in a basic carbine buffer, giving your bolt carrier group just enough extra mass to slow things down and run smoother.
If your AR runs a little snappy or you've noticed brass ejecting further forward than it should, chances are your gas system is putting more pressure through the action than a stock buffer can handle gracefully. This buffer bumps the weight up just enough to slow the bolt carrier's rearward travel, which translates to less felt recoil and less unnecessary wear on your internal parts over time. It's a common first step for guys running shorter barrels, suppressors, or aftermarket gas blocks that tend to run a bit hot.
This buffer is machined to mil-spec dimensions, so it drops straight into any standard AR-15 or M16 carbine buffer tube without any fitting drama. The body is hard coat anodized for corrosion resistance and long-term durability, and everything is made right here in the USA. It's a straightforward, no-nonsense part that does exactly what it's supposed to do without any unnecessary bells and whistles.
Whether you're troubleshooting a reliability issue or just fine-tuning how your rifle feels on the range, this buffer is a simple, affordable way to get there. Pair it with your existing spring and buffer tube and you're set, no need to swap out anything else in the system.
A standard carbine buffer runs about 3 ounces with three steel weights inside, while this H1 buffer swaps one of those for a tungsten weight to add extra mass. That added weight slows down your bolt carrier's rearward speed, which helps with rifles that run a little hot or over-gassed. It's a simple way to smooth out cycling without touching your gas system.
Yes, this buffer is machined to mil-spec dimensions so it drops right into any standard AR-15 or M16 carbine buffer tube. You can keep your current carbine spring, no need to buy a new one just to run this buffer.
Not necessarily. If your rifle locks back consistently and ejects brass cleanly, your current buffer weight is probably doing its job. This H1 buffer is more for rifles that feel snappy, eject forward, or run with a suppressor or short barrel where extra gas pressure is common.
This particular buffer is built for standard AR-15 and M16 carbine buffer tubes. If you're running an AR-10 or other .308 pattern rifle, you'll want to check White Label Armory's AR10 specific buffer options instead since the tube dimensions differ.
| UPC | 810155160777 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | WLA-BUF-7010-01 |
You must be logged in to post a review.
Reviews
There are no reviews yet.