Description
If you've ever tried torquing a barrel nut with a universal armorer's wrench, you already know the pain: it never quite fits, it slips, and you end up guessing at your torque values. The Wheeler Delta Series Crowfoot Wrench for 30mm and 1-5/16" barrel nuts fixes that headache by giving you a proper crowfoot that seats squarely and pairs with a real torque wrench for repeatable, accurate numbers every time.
This one runs a dual-ended design with a 30mm opening on one side and a 1-5/16" on the other, so a single tool covers two of the most common barrel nut sizes you'll run into on AR-15 and LR-308 builds. It drops right onto the Wheeler XL F.A.T. Wrench or any standard 1/2" drive torque wrench, which means you're not stuck with one brand's ecosystem to get the job done.
What Sets the Delta Series Crowfoot Apart
Wheeler machined this from professional-grade hardened steel, so it shrugs off the kind of leverage barrel nut work demands without bending or rounding out. The black oxide finish keeps rust and corrosion at bay and adds some life to the tool, which matters if it's living in a damp shop or a range bag between jobs. Builders who've moved over from multi-tool armorer's wrenches tend to notice it feels heavier and more solid in the hand right out of the package.
Getting the Most Out of Your Crowfoot Wrench
Because a crowfoot changes the effective length of your torque wrench, keep it inline with the wrench handle for the truest reading, or account for the offset if you angle it. Set your torque wrench to spec, seat the correct end fully on the barrel nut, and pull smooth. That's the whole point of going with a dedicated crowfoot over a catch-all wrench: precise fit, less slippage, and torque numbers you can trust when you're timing a free-float handguard or locking down a barrel.
Key Specifications
- Manufacturer: Wheeler Engineering
- Model: Delta Series
- Product Type: Barrel Nut Crowfoot Wrench
- Openings: 30mm and 1-5/16"
- Design: Dual-ended
- Drive Compatibility: 1/2" drive torque wrench / Wheeler XL F.A.T. Wrench
- Material: Hardened steel
- Finish: Black oxide
- Color: Black
- Platform: AR-15 / LR-308 (AR-10)
- Manufacturer Part Number: 1199467
- UPC: 661120749349
What’s Included
- Wheeler Delta Series 30mm/1-5/16" barrel nut crowfoot wrench (1)
Frequently Asked Questions
What torque wrench does the Delta Series crowfoot work with?
It's built to run on the Wheeler XL F.A.T. Wrench or any standard 1/2" drive torque wrench. That flexibility means you can use whatever quality torque wrench you already own to hit accurate barrel nut specs. Just make sure your wrench covers the torque range your build calls for.
Does using a crowfoot change my torque reading?
It can. A crowfoot adds length to your torque wrench, so for the most accurate reading keep the crowfoot inline with the wrench handle rather than angled 90 degrees. If you do need to offset it, you'll want to calculate for that extra length. Keeping it inline is the simplest way to get numbers you can trust.
What barrel nuts will this 30mm/1-5/16 crowfoot fit?
The dual-ended design gives you a 30mm opening on one end and a 1-5/16" opening on the other, covering two of the most common barrel nut sizes across AR-15 and LR-308 platforms. Check your handguard or barrel nut spec before you buy, since aftermarket handguards sometimes call for a proprietary size. For the two sizes it covers, it seats squarely for confident torquing.
Is the Wheeler crowfoot wrench tough enough for repeated builds?
Yes. It's machined from professional-grade hardened steel that resists bending and rounding under the leverage barrel nut work demands. The black oxide finish helps fend off rust and corrosion, so it holds up well to regular shop and range use.




Reviews
There are no reviews yet.