$137.99
49 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Anybody who has beaten on a set of night sights with a brass punch knows the feeling in their gut when the drift slips. The Wheeler Armorer's Handgun Sight Tool takes that risk off the table. It's a precision-machined aluminum sight pusher built to adjust, install, or remove dovetail-style front and rear sights on semi-automatic pistols, and it does the job with controlled force instead of guesswork and hammer taps.
The design is what makes it work. Top clamps lock down over the slide while four independent horizontal positioning clamps hold everything true and square, so the slide is fully captured and supported and won't deform while you're pushing a stubborn sight. Reference marks along the tool let you gauge exactly how far a sight has moved, which is the difference between dialing in windage and chasing your zero all afternoon. A large four-post drive knob gives you the leverage to move the sight by hand once the slide is clamped in place, and the whole unit is machined to tight tolerances so nothing wanders under load.
This is a genuinely universal pusher for semi-autos. Owners report using it on M&P, Glock, Sig P226 and P229, 1911s, CZ-75, Hi-Power, HK VP9 and more. The sight prong assembly is reversible to accommodate Glock slides, which is a common sticking point on cheaper tools. On tighter fits like some 1911 front sights, a tap with a punch on the pusher block helps break things loose, but you're still working with the slide fully protected rather than swinging steel at your finish.
Setup is quick and the printed instructions are clear and well illustrated, so even a first-time sight swap goes smoothly. Take a few minutes to square the slide in the clamps before applying pressure and you'll get clean, repeatable adjustments. Machined from high-end materials, this is a bench tool built to hold up to years of hard use, whether you're a working armorer, a range officer, or a hobbyist who likes handling their own sight work.
It's built to handle dovetail front and rear sights on virtually any modern semi-automatic pistol. Owners have used it successfully on M&P, Glock, Sig, 1911, CZ, Hi-Power, and HK models among others. The sight prong assembly reverses to fit Glock slides, and the independent clamps adjust to hold different slide widths square and secure.
The whole point of the design is to protect your slide. It fully captures and supports the slide with top clamps and four positioning clamps so it won't deform, and users consistently report clean sight swaps without scuffing the finish. Just take a minute to seat the slide squarely in the clamps before applying pressure.
For most sights you can move them with the drive knob alone, no hammer required. On tighter dovetails, like some 1911 front sights, a light tap with a punch on the pusher block helps break the sight loose. Even then, the slide stays clamped and protected the entire time, which beats drifting a sight freehand.
Yes. The tool ships with clear, well-illustrated printed instructions, and plenty of owners tackled their very first sight swap with it and came out fine. Watch a quick setup video if you want, square the slide in the clamps, and use the reference marks to track your adjustments.
| UPC | 661120109051 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 710905 |
| Color | Black |
| Length | 8.6000 |
| Model | |
| Product Type | Sight Tool |
| Shipping Weight | 4.545 |
You must be logged in to post a review.
Reviews
There are no reviews yet.