0
0

Weaver Precision Rings 1″ XX-High Matte Scope Rings | 7075-T6

UPC: 604544696370

$95.99

10 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Weaver Precision Rings in 1-inch XX-High give you the extra clearance a lot of setups demand. When you're running a big objective bell or working around a tall receiver profile, the lower ring heights just won't clear, and that's exactly where this extra-extra-high pair earns its spot. They hold a 1-inch scope tube and clamp to standard Weaver and Picatinny bases, so they drop into most common mounting systems without a hassle.

Weaver machines these from 7075-T6 aluminum, which is the good stuff when you want real strength without piling on ounces. The finish is a matte black Type III hardcoat anodize that cuts glare and shrugs off the scuffs and weather that come with time in the field. Each ring carries a recoil lug that locks into the base, so your optic stays put shot after shot instead of creeping forward under recoil. That's the detail that keeps your zero honest on hard-kicking rifles.

Why the XX-High Weaver Precision Rings Matter

Height is the whole reason this model exists. The XX-High setting lifts your optic higher off the rail than the Medium, High, or X-High versions in the same Precision family, which clears oversized objective lenses and gives you room to work on builds with a lot of stacked hardware underneath. If a standard ring has your scope kissing the barrel or the bell sitting too low, this is the fix.

Setting Up Your Weaver Precision 1-Inch Rings

Installation is straightforward with Torx cap screws holding the top caps down. Snug them in a cross pattern and bring them to spec with a torque wrench for an even clamp on your scope tube. Proudly made in America, these rings are a dependable, no-drama foundation for hunting glass, range optics, or a general-purpose build that needs the extra elevation.

Key Specifications

  • Ring Diameter: 1 inch
  • Mounting Height: XX-High (Extra-Extra-High)
  • Material: 7075-T6 Aluminum
  • Finish: Matte Black Type III Hardcoat Anodized
  • Base Compatibility: Weaver and Picatinny
  • Recoil Lug: Yes, integrated
  • Cap Screws: Torx head
  • Cap Screw Torque: 25 in-lbs
  • Country of Origin: Made in USA
  • Manufacturer: Weaver
  • Manufacturer Part Number: 48384
  • UPC: 604544696370

What’s Included

  • Pair of Weaver Precision 1" XX-High scope rings
  • Torx cap screws

Frequently Asked Questions

What size scope tube do the Weaver Precision XX-High Rings fit?

These rings are built for a 1-inch main tube scope. If your optic has a 30mm tube, you'll want the 30mm version instead. Always match the ring diameter to your scope tube for a proper, even clamp.

Will these Weaver Precision Rings work on a Picatinny rail?

Yes. The Precision Rings clamp to both Weaver and Picatinny-style bases and rails, so they fit the most common mounting systems out there. An integrated recoil lug seats into the slot to keep everything locked in place under recoil.

Why would I choose the XX-High height over a lower ring?

The XX-High setting gives you the most clearance in the 1-inch Precision lineup. It's the choice when you're running a large objective lens or a tall receiver profile that a Medium or High ring won't clear. If a lower ring has your scope bell sitting too close to the barrel, this height solves it.

What are the Weaver Precision Rings made from?

They're precision machined from 7075-T6 aluminum, which offers a strong strength-to-weight ratio, then finished with a Type III hardcoat anodize in matte black for corrosion and wear resistance. They're proudly made in America.

Additional information

UPC

604544696370

Manufacturer

Manufacturer Part Number

48384

Shipping Weight

0.3

Reviews

There are no reviews yet.

Be the first to review “Weaver Precision Rings 1″ XX-High Matte Scope Rings | 7075-T6”