Description
Weaver Precision Rings in 1" medium matte give you a clean, no-nonsense way to mount a 1-inch tube scope and keep it put. These are machined from 7075-T6 aluminum, the same high-strength alloy you'll find on serious mounting hardware, then given a Type III hardcoat anodized finish that shrugs off scuffs and weather out in the field. The matte black look keeps things low-key on a hunting rig or a general-purpose range rifle, and the low-profile footprint doesn't add bulk where you don't want it.
What Sets the Weaver Precision Rings Apart
The standout here is the integrated recoil lug on the bottom of each ring. It nests into the slot on your rail or base, giving you real mechanical engagement so the rings don't creep under recoil. That's what keeps your zero honest round after round, whether you're running a lightweight deer rifle or a hard-kicking magnum. Mounting is handled by durable Torx head cap screws, which give you consistent, repeatable clamping on the scope tube without chewing up the hardware over time.
Fitment and Mounting Your Weaver Precision Rings
These rings play nice with both Weaver and Picatinny-style rails and bases, so you've got flexibility across a wide range of setups. Medium height is the versatile middle ground that works for a lot of common objective bell sizes, clearing the barrel without jacking your scope up higher than you need. When you mount up, Weaver's recommended torque is 25 in-lbs on the cap screws and 25 in-lbs on the clamp screw. Stick to that and you'll get a solid hold without risking damage to your scope tube.
Made in America and built to take a beating, the Weaver Precision Rings are a straightforward, dependable choice for hunters and range regulars who want their optic rock-solid and ready when it counts.
Key Specifications
- Manufacturer: Weaver
- Manufacturer Part Number (MPN): 48381
- UPC: 604544696332
- Tube Diameter: 1 inch
- Ring Height: Medium
- Finish: Matte Black, Type III Hardcoat Anodized
- Material: 7075-T6 Aluminum
- Base Compatibility: Weaver and Picatinny-style rails and bases
- Recoil Lug: Integrated
- Hardware: Torx head cap screws
- Recommended Torque: Cap screws 25 in-lbs, Clamp screw 25 in-lbs
- Country of Origin: Made in USA
What’s Included
- Weaver Precision Rings (pair) with cap screws and clamp hardware
Frequently Asked Questions
Will the Weaver Precision Rings fit my scope?
These rings are built for scopes with a 1-inch main tube, which is one of the most common diameters out there. They're the medium height option, which clears most standard objective bells while keeping the scope low for a comfortable cheek weld. If your scope has a 30mm tube, you'll want the 30mm version instead.
What rails do the Weaver Precision Rings mount to?
They're compatible with both Weaver and Picatinny-style rails and bases, so you've got plenty of flexibility across different rifles. The integrated recoil lug on the bottom of each ring drops into the slot on the rail for solid mechanical engagement. That's what keeps them from shifting under recoil.
How tight should I torque the Weaver Precision Rings?
Weaver recommends 25 in-lbs on the cap screws and 25 in-lbs on the clamp screw. Using a quality torque wrench is the way to go here so you get a secure hold without over-tightening and marring your scope tube. Tighten the cap screws evenly, a little at a time, to keep even clamping pressure around the tube.
Are the Weaver Precision Rings strong enough for a hard-kicking rifle?
They're machined from 7075-T6 aluminum, a high-strength alloy, and finished with a durable Type III hardcoat anodized coating. The integrated recoil lug gives you real mechanical lockup so the rings don't walk under heavy recoil. That combination is why they hold zero shot after shot on everything from lightweight hunting rifles to magnum calibers.




Reviews
There are no reviews yet.