0
0

Weatherby TRBVLAS1 Scope Mount, 1-inch Tube, Medium, Mark V 6-Lug

UPC: 747115438396

$49.99

10 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Mounting a scope to your Weatherby Mark V doesn't need to turn into a shop project. The Weatherby TRBVLAS1 is a one-piece scope mount and ring combo built by Talley, machined from 7000 series billet alloy and finished in matte black. It's cut for a 1-inch scope tube at medium ring height and fits the Mark V standard 6-lug action specifically, so the fit is dialed in right from the factory. The set includes a left and right mount, giving you a front and rear ring and base in two pieces total.

Why the Talley One-Piece Design Works

The big draw with this style of mount is that the ring and base are a single unit instead of separate parts stacked together. With no joint between the ring and the base, there's no interface to drift out of alignment and no connection to shake loose under recoil. That translates to consistent alignment and dependable zero retention round after round, and because it's aluminum alloy rather than steel, you get that stability without adding much weight up top.

Fitting the TRBVLAS1 to Your Mark V

These are made to bolt straight to the receiver, and lapping is not required before installation. Owners running these on Accumark and similar Mark V rifles consistently note a flush fit with no gaps and scopes that need little more than minor vertical adjustment once mounted. Medium height is a solid middle-ground choice that clears most common objective bells, pairing well with scopes in the 40mm range.

What the Medium Height Covers

Medium rings give you breathing room over the barrel for typical hunting and general-purpose glass without sitting the scope unnecessarily high. If you're building a classic Mark V deer or big game rig with a 1-inch tube optic, this combo keeps the setup tidy, repeatable, and ready for the range or the field. It's a clean, no-nonsense way to get your optic locked down and shooting straight.

Key Specifications

  • Manufacturer: Weatherby
  • Manufacturer Part Number: TRBVLAS1
  • Model: Scope Mount/Ring Combo
  • UPC: 747115438396
  • Built By: Talley
  • Fit: Weatherby Mark V Standard 6-Lug Action
  • Scope Tube Diameter: 1 inch
  • Ring Height: Medium
  • Material: 7000 Series Billet Alloy
  • Finish: Matte Black
  • Design: One-Piece Integrated Ring and Base
  • Lapping Required: No
  • Sold As: Pair
  • Product Type: Accessory-Rings/Mounts/Bases

What’s Included

  • Front and rear one-piece scope mounts (pair)
  • 6-48 mounting screws
  • T-15 wrench

Frequently Asked Questions

What rifle does the Weatherby TRBVLAS1 fit?

The TRBVLAS1 is designed specifically for the Weatherby Mark V with a standard 6-lug action. It is not made for the Vanguard or the magnum 9-lug Mark V, so make sure you're matching it to the correct action. The receiver-specific fit is what lets it bolt on cleanly without extra fitting work.

Do I need to lap these rings before mounting my scope?

No. Because the ring and base are machined as one piece to tight tolerances, lapping is not required and the mount is ready to install out of the box. Owners regularly report a flush fit with scopes needing little adjustment once mounted.

Will the medium height clear my scope's objective?

Medium rings give good clearance for most common hunting optics, and they pair especially well with scopes in the 40mm objective range. If you're running a larger bell or want a lower cheek weld, you'd want to check the other available heights, but medium is a versatile choice for a 1-inch tube build on the Mark V.

Is the Weatherby TRBVLAS1 for a 1-inch or 30mm scope tube?

This model is cut for a 1-inch scope tube. If your optic has a 30mm main tube, you'll want the 30mm version of this Mark V 6-lug mount instead. Matching the ring diameter to your scope tube is important for a proper, damage-free clamp.

Additional information

UPC

747115438396

Manufacturer

Manufacturer Part Number

TRBVLAS1

Length

8

Model

Package Height

2.0

Package Width

3.9

Product Type

Accessory-Rings/Mounts/Bases

Shipping Weight

0.22

Reviews

There are no reviews yet.

Be the first to review “Weatherby TRBVLAS1 Scope Mount, 1-inch Tube, Medium, Mark V 6-Lug”