Description
There's a reason the Vanguard action has stuck around for more than 50 years, and the Outfitter takes that proven platform and dresses it for hard use. This one is chambered in .223 Rem, which makes it a natural fit for coyotes, prairie dogs, and long afternoons at the bench where cheap, plentiful ammo is a real perk. The 24 inch cold hammer forged barrel gets you every bit of velocity the cartridge has to offer, and the 1:9 twist stabilizes a wide range of common bullet weights.
What Sets the Vanguard Outfitter Apart
The spiral fluting on the barrel isn't just for looks. It trims weight and adds surface area to help the barrel shed heat faster, which matters when you're running strings on a dog town. The muzzle comes threaded 1/2×28 with Weatherby's Accubrake ST already installed, so muzzle rise is basically a non-issue with a cartridge this mild. Metalwork wears graphite black Cerakote for serious corrosion resistance, and the tan Monte Carlo synthetic stock gets a hand-applied brown and white sponge paint treatment, so no two look exactly alike. Textured touch points keep your grip solid in wet weather, and swivel studs are ready for a sling or bipod.
Accuracy You Can Count On
Every Vanguard carries Weatherby's Sub-MOA guarantee, meaning a 3-shot group of .99 inch or less at 100 yards with quality ammo. The match-grade two-stage trigger is adjustable down to 2.5 pounds, which makes wringing out that accuracy a lot easier. The three-position safety lets you cycle the bolt with the safety engaged, and the fully enclosed bolt sleeve redirects gases away from your face in the rare event of a case rupture. Rounds feed from a 5-round internal magazine with a hinged floorplate for quick, clean unloading.
At 6.75 pounds bare and 44 inches overall, it carries well for a 24 inch barreled rifle. The receiver ships without sights, so plan on adding a scope, and this platform deserves good glass.
Key Specifications
- Manufacturer Part Number: VHH223RR6B
- UPC: 747115453894
- Caliber: .223 Rem / 5.56 NATO
- Action: Bolt Action
- Barrel Length: 24 in, spiral fluted, cold hammer forged
- Muzzle: 1/2×28 threaded with Accubrake ST
- Twist Rate: 1:9
- Capacity: 5+1, hinged floorplate
- Trigger: Two-stage match, adjustable down to 2.5 lbs
- Safety: 3-Position
- Stock: Tan Monte Carlo synthetic with brown and white sponge paint
- Metal Finish: Graphite Black Cerakote
- Overall Length: 44 in
- Weight: 6.75 lbs
- Sights: None, drilled and tapped for scope mounts
- Accuracy: Sub-MOA guarantee (3-shot group of .99 in or less at 100 yards)
What’s Included
- Weatherby Vanguard Outfitter rifle
- Accubrake ST muzzle brake (factory installed)
- Owner's manual
Frequently Asked Questions
Is the Weatherby Vanguard Outfitter guaranteed to shoot Sub-MOA?
Yes. Weatherby backs every Vanguard with a Sub-MOA guarantee, meaning a 3-shot group measuring .99 inch or less at 100 yards when fired from a rest with premium factory ammo. The cold hammer forged barrel and adjustable two-stage match trigger do a lot of the heavy lifting to get you there.
Can I shoot 5.56 NATO in this Vanguard Outfitter?
This rifle is listed for .223 Rem / 5.56 NATO, so it handles both. That gives you a ton of flexibility, since 5.56 range ammo is everywhere and match-grade .223 loads are easy to find. With the 1:9 twist, most bullets in the 40 to 69 grain range should stabilize well.
Does the Vanguard Outfitter come with sights or a scope?
No, it ships without iron sights. The receiver is set up for scope bases, so plan on adding rings and glass before heading out. Given the Sub-MOA guarantee and the 24 inch barrel, a quality variable-power scope is the way to get the most out of it.
Can I remove the muzzle brake and run a suppressor?
You can. The Accubrake ST threads onto a standard 1/2×28 muzzle, which is the most common thread pitch for .223 caliber suppressors and other muzzle devices. Just swap the brake off and thread on whatever you prefer, or run a thread protector for a clean profile.




Reviews
There are no reviews yet.