$1,399.00
4 in stock
Online inventory may differ from in-store availability.
NOTICE: This item is subject to shipping times of 10-12 days due to brand shipping logistics.
Orders are processed quickly so your item gets moving as soon as possible.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The Walther PDP Pro ACRO Full-Size is the top-tier configuration of Walther's Performance Duty Pistol line, and it shows. Built on a full-size polymer frame with a 4.5-inch polygonal rifled barrel, this 9mm striker-fired pistol ships with an Aimpoint ACRO P-2 enclosed-emitter red dot already installed on a proprietary direct-milled slide cut. There is no adapter plate, no extra hardware to source, no guesswork involved. Zero it and go. Three 10-round magazines and a MIL-STD 1913 Picatinny accessory rail round out a package that is genuinely ready to run the moment it leaves the box.
The "Pro" designation on this pistol is not just marketing. It marks a meaningful step up from the base PDP. The flat-faced Dynamic Performance Trigger breaks cleanly at around five pounds with a short reset that earns consistent praise from reviewers and duty users alike. The slide features Walther's deep-cut SuperTerrain serrations front and rear for positive manipulation even with gloves on. An aluminum flared magwell promotes faster, more intuitive reloads. And the PDP Pro ACRO is the only model in the PDP lineup that comes standard with tritium 3-dot night sights, which co-witness through the ACRO window as a reliable backup. The stepped chamber design, where the forward portion is slightly tapered, helps center the projectile as it enters the polygonal rifling and contributes to the consistent accuracy this pistol is known for.
The Aimpoint ACRO P-2 is not a budget optic that just happens to come with the gun. It is a fully enclosed-emitter design with hardened front and rear lenses, sealed electronics, and a reputation for surviving conditions that would kill most pistol red dots. Because the slide is direct-milled to the ACRO footprint, the optic sits lower and more stable than any adapter plate setup, which improves both dot tracking during recoil and overall sight picture. A 3.5 MOA dot is appropriately sized for fast target acquisition without obscuring precision shots at distance.
Walther's grip ergonomics have been a calling card since the P99 days, and the PDP Pro carries that forward. The honeycomb-textured grip locks hands in place during rapid fire without being abrasive during extended range sessions. Controls are fully ambidextrous with a reversible mag release, and the included backstraps allow you to dial in the grip sizing to your hand. Because this pistol shares its frame geometry with the standard PDP full-size, existing PDP-compatible holsters typically fit without modification, which is a real practical advantage for anyone already in the Walther ecosystem or shopping from established holster makers.
Yes, the Aimpoint ACRO P-2 ships already installed on the pistol's direct-milled slide. There is no adapter plate required and no additional hardware to purchase. You will need to zero the optic to your preferred distance, but the setup work is done before it ever reaches your hands.
The base PDP models come with a curved-face Performance Duty Trigger, while the Pro series upgrades to a flat-faced Dynamic Performance Trigger with a skeletonized safety block. Both are well-regarded, but the flat-face DPT on the Pro offers a cleaner, more consistent feel with a roughly five-pound pull and an ultra-short reset that shooters and reviewers consistently single out as exceptional for a stock factory trigger.
The aluminum magwell that ships installed on the Pro ACRO is sized for Pro-series magazines with aluminum baseplates and will block standard polymer-base PDP mags from seating fully. However, the magwell is removable with a simple pin punch, after which standard polymer-base PDP magazines will feed and function normally. The three included 10-round magazines are the correct spec for the installed magwell.
Because the PDP Pro ACRO shares the same frame and slide dimensions as the standard PDP Full-Size, most holsters designed for the standard PDP Full-Size platform will fit this pistol. If your holster accommodates the Aimpoint ACRO footprint, you should be in good shape. It is always worth confirming with the holster manufacturer that their specific mold supports both the full-size frame and the ACRO optic before purchasing.
The ACRO P-2 is a fully enclosed-emitter optic, meaning the LED emitter and optical channel are completely sealed from rain, mud, and debris. The electronics are protected from water intrusion, and the front and rear lenses are hardened against impact. It remains one of the few red-dot sights approved for duty carry by a wide range of law enforcement agencies, which speaks to its track record in demanding conditions.
The PDP Pro ACRO is tuned for standard and duty-weight 9mm loads, such as 115-grain and 124-grain FMJ or JHP ammunition. Very light or sub-sonic loads, particularly 147-grain competition loads running below standard velocity thresholds, may cause cycling issues. Stick with standard-pressure or +P duty ammo and you should have no reliability concerns.
| UPC | 723364235467 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 2880091PRO |
| Action | |
| Barrel Length | 4.5" |
| Caliber/Gauge | 9mm |
| Capacity | 10 + 1 |
| Color | Black |
| Length | 15 |
| Number of Magazines | 3 |
| Sights Type | FIXED |
| Slide Description | Serrated w/Optic |
| State Restriction (RI) | NO DIRECT SHIP TO RHODE ISLAND |
| State Restriction (WA) | NO DIRECT SHIP TO WASHINGTON |
You must be logged in to post a review.
Reviews
There are no reviews yet.